sequential injection maf based 4cyl

[Dazza92VP]

i was thinking of using a 16234531 pcm that i have here which is vs series III 5l for my wb tonner once ive got it running and i cut the wiring down to basic needed components but i thought what if some one wanted sequential on a conversion and i came up with the attached obviously its pretty much the same but using:
injector 1 as injector 1
injector 2 as injector 6
injector 3 as injector 7
injector 4 as injector 4

use 4 cyl dizzy with 8 tooth copper wheel
build cam sensor chopper wheel find hall effect sensor to suit

mask DTCs if possible for
vats off
knock sensor
l/h or r/h o2 sensor error
A/F ratio variation between banks
and probably injector power supply monitor

tune memcal to suit

its just curiosity and im bored
also thought it would fix peoples problems with not being able to use their vss if they have a hall effect or reluctor type seeing as this pcm can do both as ive read

[alfranatic]

It's nice.I will post later.
Thanks for now