VS-VY Enhanced Factory Bins
Re: The1's Enhanced Factory Bins
pretty rich lol
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: The1's Enhanced Factory Bins
Tunerpro can get unstable with invalid sizes in the xdf or adx. Its written in c so it doesnt always crash straight away... Just sometimes later. I'd recommend testing with stock xdf and adx then gradually reapply any customisations to do with packet sizes and offsets.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: The1's Enhanced Factory Bins
It is weird, the car did some really weird stuff when I put a new battery in it, was sucking gas something cronic, seems to have settled down. Non of the MAF or injector tables have been touched so there really is no reason for it to throw such wild numbers unless the O2 sensors are kaput, they do swing as per normal when it's up to temp and plenty of cross counts?The1 wrote:pretty rich lol
I'll run a new log on the weekend when I have the car with the new ADX, I am fairly certain however that it's always done it.
Cheers, something to check out.antus wrote:Tunerpro can get unstable with invalid sizes in the xdf or adx. Its written in c so it doesnt always crash straight away... Just sometimes later. I'd recommend testing with stock xdf and adx then gradually reapply any customisations to do with packet sizes and offsets.
-
- Posts: 3
- Joined: Sat Mar 12, 2016 6:53 am
- cars: Vt commodore 1999 acclaim
Re: The1's Enhanced Factory Bins
It doesn't work for my vt 1999 model v6 iim running the ALDLDroid app help please
Re: The1's Enhanced Factory Bins
What model USB interface are you using?
That has an effect. I've seen cheap one's current later model PCM's when writing ne BIN's etc.
Logging could be similair.
That has an effect. I've seen cheap one's current later model PCM's when writing ne BIN's etc.
Logging could be similair.
Re: The1's Enhanced Factory Bins
when i flash the vy enhanced code do i have to disable vats or will it be fine
Re: The1's Enhanced Factory Bins
disable vats, unless you have a tech2 to relink the pcm and bcm. This is the case for VX VY Flash PCM Models. For all VT VX VY Models if the PCM is changed it also applies, VS Models arn't linked.
Re: The1's Enhanced Factory Bins
updates VS N/A and L67 xdf's fixed Decel Tables.
Added IAC Tables to VY S/C xdf
Added IAC Tables to VY S/C xdf
Re: The1's Enhanced Factory Bins
updated VX V6 Flash XDF, added some items. Fixed a few comments in the VY V6 S/C ADX
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: The1's Enhanced Factory Bins
just put vx enhanced in the wagon off for a drive and log or 3
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem