Page 6 of 84

Re: Extended Factory Bins

Posted: Thu Aug 16, 2012 6:56 am
by The1
Did write bin instead of write Cal the computer freeze.

Re: Extended Factory Bins

Posted: Sat Aug 18, 2012 4:19 pm
by The1
Some Flash PCM bins are up now, currently just extended MAF no spark yet.

Re: Extended Factory Bins

Posted: Sat Aug 18, 2012 7:16 pm
by VL400
The1 wrote:Did write bin instead of write Cal the computer freeze.
Terrible timing for a PC freeze :(
The1 wrote:Some Flash PCM bins are up now, currently just extended MAF no spark yet.
Excellent work :thumbup:

Re: Extended Factory Bins

Posted: Sat Aug 18, 2012 7:56 pm
by The1
desoldered and reflashed, all working again :)

Re: Extended Factory Bins

Posted: Sun Aug 26, 2012 12:41 pm
by The1
Just released VS V6 NA extended bin, which includes extended maf, injector multiplier table and extended spark tables like in VT up bins. I have set the spark table as a ruff guide to get your started.

Also thanks to charlay86 for coding the injector multiplier part of the mod.

Also it uses the new realtime bin, there should be an updated oseplugin out soon so you can run this bin in realtime.

Re: Extended Factory Bins

Posted: Sun Aug 26, 2012 1:43 pm
by The1
ive upload the two vs v6 adx's with maf part changed and also an extra table to log inj BLM % then there is also an excel spreadsheet there so you can paste from the history table in to give you your new updated table.

Re: Extended Factory Bins

Posted: Sun Aug 26, 2012 7:03 pm
by VL400
Excellent work as always, a huge improvement over stock $51 code :punk:

Re: Extended Factory Bins

Posted: Sun Aug 26, 2012 7:27 pm
by The1
:mrgreen: :D getting there, yes huge improvment, running the code update in my car now, taking the car to work and do some retuning back and forth.

Re: Extended Factory Bins

Posted: Mon Aug 27, 2012 12:15 pm
by The1
How's it going everyone, good or bad comments, have about 30 downloads of supercharged bins.

Re: Extended Factory Bins

Posted: Mon Aug 27, 2012 8:19 pm
by The1
well took the car to work and back and used in the inj multi table to tune the fueling, seems to be working a treat, just using the excel sheet to update the table from the history table results. :mrgreen: Will get the same changes made to the VS L67 bin next.