Page 66 of 84
Re: The1's Enhanced Factory Bins
Posted: Mon Oct 16, 2017 4:43 pm
by Wade
If I change diff gears in my vy will I need a speedo corrector? And what parts of the tune need changing?
Re: The1's Enhanced Factory Bins
Posted: Mon Oct 16, 2017 4:57 pm
by The1
Just change speedo ppk with tech2
Re: The1's Enhanced Factory Bins
Posted: Mon Oct 16, 2017 7:35 pm
by Wade
What’s the knock sensor logic enable, variable option and cylinder nok sensor present used for?
Re: The1's Enhanced Factory Bins
Posted: Mon Oct 16, 2017 9:03 pm
by The1
to turn it on/off and per cyl
Re: The1's Enhanced Factory Bins
Posted: Tue Oct 17, 2017 10:34 am
by Wade
Ok cheers mate
Re: The1's Enhanced Factory Bins
Posted: Sun Oct 22, 2017 10:04 pm
by Wade
The1 can you add injector blm% in the vy flash adx. So I can use the injector multiplier spread sheet. Or will the vx adx Work just for those changes
Re: The1's Enhanced Factory Bins
Posted: Tue Oct 24, 2017 9:52 am
by The1
they are already in there.
Left Hand Short Term Fuel Correction %
Right Hand Short Term Fuel Correction %
Left Hand Long Term Fuel Correction %
Right Hand Long Term Fuel Correction %
Re: The1's Enhanced Factory Bins
Posted: Tue Nov 28, 2017 2:52 pm
by krusty
The1 wrote:VT V8 enhanced updated to v1.0 it now has Knock Active Loops and Pin A5 B10 enabled
Having trouble logging on a VT1 5L using VTV8 enhanced and NVRAM. Does a wiring mod need to be done to the pcm circuit board to allow logging and RT adjustment?
Re: The1's Enhanced Factory Bins
Posted: Tue Nov 28, 2017 3:10 pm
by delcowizzid
Shouldn't need any mods do you have the later nvram module from here with vs/vt selection jumper
Re: The1's Enhanced Factory Bins
Posted: Tue Nov 28, 2017 3:16 pm
by krusty
delcowizzid wrote:Shouldn't need any mods do you have the later nvram module from here with vs/vt selection jumper
Yeah later one with VT selected and RW enabled.