pcmhacking.net

Is there an enhanced factory code for VT5L Manual?

there isn't no, but you can use the Auto one and change the flags. There is a factory nvram enabled manual bin if you dont require enhanced features but you want to realtime tune.

viewtopic.php?f=27&t=613

Hi Mate,

Is there any possibility you can add the spark correction for lean cruise table into the VX SC bin please?

I think I got it sorted, found the table in the VT xdf so I've copied it over and adjusted the hex address offset to suit.

when scaling a maf sensor how do you then scale the default fallback table/what tables do you change

when you unplug the maf sensor what tables dose the ecu fall back to determine cylair

theres a default airflow table. You can log the current values via a history table and update the table values using the live data.

I didn't want to start a new thread. Here is my question can I extend the XDF file so I can increase rpm limit? Please see attached screenshot - Here I added rows 17 and 18 and gave them the same 400rpm increment. Or is this the wrong way to tackle this?
Thanks

No you can't just change the xdf to add rows or colomns

Thanks for quick reply. So what are my options here?

In short, there is no simple answer unless you want to re-write the whole code.