Spark only bin to turn 808 into programmable ignition ecu
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
Hey VNracer34G didnt realise you are in newzealand too.you guys arnt really allowed an aftermarket tune are you meant to be factory tunes only isnt it.i can sort you out a special one if you want one .send me a PM or email me my email should be in my profile.
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 345
- Joined: Sun Apr 05, 2009 1:07 pm
- cars: VN V6 Production Saloon
- Location: Gisborne NZ
Re: Spark only bin to turn 808 into programmable ignition ecu
Cheers man e-mail sent
Build it, Race it, Break/Bend it ; Repeat.
-
- Posts: 345
- Joined: Sun Apr 05, 2009 1:07 pm
- cars: VN V6 Production Saloon
- Location: Gisborne NZ
Re: Spark only bin to turn 808 into programmable ignition ecu
Right, i think its time to revive this thread, a couple of hours ago i got handed the 808 out of a stock car. I popped out the memcal and it has a tall zif socket in it already with an aftermarket chip and the knock board removed, i haven't got apround to purchasing a reader/burner as yet - been concentrating on getting 34G going worth a damn and thanks to delcowizzid its getting there
Hey delcowizzid i am going to send a couple of chips back your way this week anyway - if i send you this stockcar memcal would you have a read of it and maybe post it up here for the community to check out and give feedback?? I'll need it back pretty quickly though as its the only one the car has
Hey delcowizzid i am going to send a couple of chips back your way this week anyway - if i send you this stockcar memcal would you have a read of it and maybe post it up here for the community to check out and give feedback?? I'll need it back pretty quickly though as its the only one the car has
Build it, Race it, Break/Bend it ; Repeat.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
yip sweet as mate post it down
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 345
- Joined: Sun Apr 05, 2009 1:07 pm
- cars: VN V6 Production Saloon
- Location: Gisborne NZ
Re: Spark only bin to turn 808 into programmable ignition ecu
cool as mate, e-mail sent, now to be a tightarse and pull out one on the packages you sent me for 'recycling' hahaa
Last edited by VNracer34G on Wed Dec 09, 2009 3:29 pm, edited 1 time in total.
Build it, Race it, Break/Bend it ; Repeat.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
could try the wrong address return to sender be real tightarse LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
lol
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 345
- Joined: Sun Apr 05, 2009 1:07 pm
- cars: VN V6 Production Saloon
- Location: Gisborne NZ
Re: Spark only bin to turn 808 into programmable ignition ecu
Box recycled with a peice of paper i PRINTED our respective To & Sender addresses wrapped around it - all you gotta do is take the paper off to send it back again time will tell who the real tightarse is eh! lmfaodelcowizzid wrote:could try the wrong address return to sender be real tightarse LOL
i have enclosed the first chips 1,2,3 and one of my spare memcals so you can set one up with a knock board for the stockcar
Build it, Race it, Break/Bend it ; Repeat.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
sweet as did you send the tune to read as well i want a laugh
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 345
- Joined: Sun Apr 05, 2009 1:07 pm
- cars: VN V6 Production Saloon
- Location: Gisborne NZ
Re: Spark only bin to turn 808 into programmable ignition ecu
Yeah mate i sent the whole memcal so you can have a good laugh at how they 'removed' the knock board - sidecutters by the look of it. Sent fastpost yesterday lunchtime.
Build it, Race it, Break/Bend it ; Repeat.