Spark only bin to turn 808 into programmable ignition ecu
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
i had a good laugh in general at this one its bloody halerious if you ask me. opens with $5D.xdf the numbers look wrong but trust me its what they had programmed in there LOL spark table looks offset its not file attached for LOL's
- Attachments
-
- torqueP stockcar.zip
- (9.14 KiB) Downloaded 466 times
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 345
- Joined: Sun Apr 05, 2009 1:07 pm
- cars: VN V6 Production Saloon
- Location: Gisborne NZ
Re: Spark only bin to turn 808 into programmable ignition ecu
So it finally showed up mate - so i take it you'll be able to wake the beast up without too much drama then?
Build it, Race it, Break/Bend it ; Repeat.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
send me details on it is it on pump fuel v6 man exhaust off at the y-pipe like yours and a 2 barrel webber i take it.ide preobably try fit the throttle position sensor to the carby shaft too god knows how though thats your brain teaser for the week
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
hahahaha
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 345
- Joined: Sun Apr 05, 2009 1:07 pm
- cars: VN V6 Production Saloon
- Location: Gisborne NZ
Re: Spark only bin to turn 808 into programmable ignition ecu
O.K then, Its got a VNs2 3800 in it. +.040" ACL race series pistons, block/heads shaved for 10.0:1 comp (max allowable) supposedly got a flash valve job but unported ( till i do a pair for it ) intake modified for a foulcan 2bbl webber - with no chance of getting a tps on it this week-see pics. It uses two left hand cast manifolds feeding into 2in primarys fairly long and equal length into a collector with 2 1/2in out into a 3in donut with a dump off the back.
MAP, MAT, coolant temp and crank sensors are feeding into a 808 with the memcal posted above by delcowizzid.
I'll probably end up welding a lug onto a nut for the throttle shaft and fabricate a bracket to mount a tps but it wont happen overnight as i have a bit to do on 34G before this weekends racing plus with being in a new job no sleep isn't an option and the last minute thrash is out the window with working saturday mornings.
MAP, MAT, coolant temp and crank sensors are feeding into a 808 with the memcal posted above by delcowizzid.
I'll probably end up welding a lug onto a nut for the throttle shaft and fabricate a bracket to mount a tps but it wont happen overnight as i have a bit to do on 34G before this weekends racing plus with being in a new job no sleep isn't an option and the last minute thrash is out the window with working saturday mornings.
Build it, Race it, Break/Bend it ; Repeat.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
TPS probably isnt a biggy it can quess tps off rpm to tell itself its got throttle on for now. have socketed both memcals got rid of the dodgy socket job soldered to cut eprom pins LOL added a knock filter board i had lyeing round as well so youll get 2 memcals and a hand full of chippies in the mail soon
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 345
- Joined: Sun Apr 05, 2009 1:07 pm
- cars: VN V6 Production Saloon
- Location: Gisborne NZ
Re: Spark only bin to turn 808 into programmable ignition ecu
delco you da man!!! if only the postie could deliver the goods as quick as you mate, hopefully the classes will be staggered to allow me to observe the stockcar in action on saturday night, even if i dont the whole place will be buzzin if that thing starts showing some real pace and manages to finish a race.delcowizzid wrote: have socketed both memcals got rid of the dodgy socket job soldered to cut eprom pins LOL added a knock filter board i had lyeing round as well so youll get 2 memcals and a hand full of chippies in the mail soon
I'll keep y'all posted lol
Build it, Race it, Break/Bend it ; Repeat.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
i told the lady at the post office to make sure he used his fast bike and to make sure she released the postman savaging pitbulls as he left to make him pedal faster LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 345
- Joined: Sun Apr 05, 2009 1:07 pm
- cars: VN V6 Production Saloon
- Location: Gisborne NZ
Re: Spark only bin to turn 808 into programmable ignition ecu
Haha so the package is coming up via Invercargill then, better give Mayor Tim a bell so he can whip up here in his Calais
Build it, Race it, Break/Bend it ; Repeat.