VR CAKH tunerpro logging
Posted: Sun Feb 17, 2013 7:10 pm
Hooked up the trusty laptop today to do some logging....
VR CAKH based tune, VR_$11_v1.04-tp5.adx.... to my surprise something is not right, prior logging using a BPLZ based tune were fine, everything was correct.
what i can see from a quick glance being displayed incorrectly:
desired idle
target afr
o2 voltage (this seems to actually be reading the tps, as i push the pedal the displayed voltage rises)
battery voltage
anyone know what is going on? did a quick search but couldn't find anything....
using efilive v4 everything reads correctly so ruling out a problem with the ecu, tune & cable
VR CAKH based tune, VR_$11_v1.04-tp5.adx.... to my surprise something is not right, prior logging using a BPLZ based tune were fine, everything was correct.
what i can see from a quick glance being displayed incorrectly:
desired idle
target afr
o2 voltage (this seems to actually be reading the tps, as i push the pedal the displayed voltage rises)
battery voltage
anyone know what is going on? did a quick search but couldn't find anything....
using efilive v4 everything reads correctly so ruling out a problem with the ecu, tune & cable