Wanted To Buy V6 Wiring Loom
Wanted To Buy V6 Wiring Loom
I'm wanting to buy a VN V6 wiring loom for my Delco conversion on my Holden 202.
Id prefer one in good condition, not gone brittle from heat or been cut and joined etc.
PM or email, dbillington1@bigpond.com
Id prefer one in good condition, not gone brittle from heat or been cut and joined etc.
PM or email, dbillington1@bigpond.com
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Wanted To Buy V6 Wiring Loom
Keep an eye out for N13 pulsar looms too, common, cheap and easy to remove.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Wanted To Buy V6 Wiring Loom
and have less work to make them fit on a 202!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: Wanted To Buy V6 Wiring Loom
Thanks guys sound like a good idea I will try and hunt one up.
- vlad01
- Posts: 7804
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Wanted To Buy V6 Wiring Loom
you can pick up good v6 ones from the wreckers for about 30-50 bucks.
I paid 35 for one that was better than any of my cars ever had.
I paid 35 for one that was better than any of my cars ever had.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: Wanted To Buy V6 Wiring Loom
antus wrote:Keep an eye out for N13 pulsar looms too, common, cheap and easy to remove.
Just searched ebay, looks like a few different shapes are called N13. Is the efi common across them?
Re: Wanted To Buy V6 Wiring Loom
http://www.ebay.com.au/itm/140948220320 ... _500wt_923
This model suit? The owner can help me out with loom and ecu and module!
This model suit? The owner can help me out with loom and ecu and module!
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Wanted To Buy V6 Wiring Loom
Just ask if the ECM is 1227808, if so it's the right one
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: Wanted To Buy V6 Wiring Loom
I did that and it is so I'm getting loom ecu and ignition module for $75 delivered.
Not sure on the module ion these so got it anyway but will it be what I need?
Not sure on the module ion these so got it anyway but will it be what I need?
Re: Wanted To Buy V6 Wiring Loom
The ignition module is the same as the Camira ones.
The 1.6L N13s also came out with TBI and an 808, easy way to tell the difference is ask for a photo of the engine and count the injectors
The 1.6L N13s also came out with TBI and an 808, easy way to tell the difference is ask for a photo of the engine and count the injectors