pcmhacking.net

I'm wanting to buy a VN V6 wiring loom for my Delco conversion on my Holden 202.
Id prefer one in good condition, not gone brittle from heat or been cut and joined etc.

PM or email, dbillington1@bigpond.com

Keep an eye out for N13 pulsar looms too, common, cheap and easy to remove.

and have less work to make them fit on a 202!

Thanks guys sound like a good idea I will try and hunt one up.

you can pick up good v6 ones from the wreckers for about 30-50 bucks.

I paid 35 for one that was better than any of my cars ever had.

antus wrote:Keep an eye out for N13 pulsar looms too, common, cheap and easy to remove.

Just searched ebay, looks like a few different shapes are called N13. Is the efi common across them?

http://www.ebay.com.au/itm/140948220320 ... _500wt_923

This model suit? The owner can help me out with loom and ecu and module!

Just ask if the ECM is 1227808, if so it's the right one

I did that and it is so I'm getting loom ecu and ignition module for $75 delivered.
Not sure on the module ion these so got it anyway but will it be what I need?

The ignition module is the same as the Camira ones.
The 1.6L N13s also came out with TBI and an 808, easy way to tell the difference is ask for a photo of the engine and count the injectors