Page 1 of 2
vt and vy engine wiring loom swap
Posted: Thu May 16, 2013 5:50 pm
by drippy
ok so ive got myself a VT engine wiring loom and ecu at a nice cheap price haha
so my question to the wise ones out there, as im hopeless at reading the wiring looms haha
if i swap the VY loom with the VT loom will it work? i know the ecu's are different pin outs ect. but will the
loom connect up the same as the VY one? or is it differently pinned when it connects to the rest of the VY harness?
thanks heaps for help
Re: vt and vy engine wiring loom swap
Posted: Thu May 16, 2013 6:35 pm
by Holden202T
is it in a VY or other car ?
Re: vt and vy engine wiring loom swap
Posted: Thu May 16, 2013 9:08 pm
by drippy
Yeh sorry, it is in a vy,
I know the vt ecu was in the vy with the supercharged models
I'm wanting to avoid having to repin the wiring loom if I can avoid it haha
To many wires...
Re: vt and vy engine wiring loom swap
Posted: Thu May 16, 2013 10:01 pm
by vs ss
Hi the vx-vy n/a flash pcm has a different pinout to the vt n/a pcm
Re: vt and vy engine wiring loom swap
Posted: Thu May 16, 2013 11:33 pm
by VL400
Not sure what your trying to achieve but another potential issue is you need to run a vy bin to keep the dash happy. So it will be a s/c bin, if your sticking with the na engine you will have some changes to make.
Re: vt and vy engine wiring loom swap
Posted: Thu May 16, 2013 11:57 pm
by drippy
i have a raptor supercharger, thats why im changing to the S/C vy bin,
im just seeing if i can swap the looms over as ive got a complete one here, otherwise ill be repinning the connector... i want to avoid this haha
it would have been nice if they had the same pinouts so i could plug and play
Re: vt and vy engine wiring loom swap
Posted: Fri May 17, 2013 6:33 am
by kojab
What is your location? Maybe a tuner in your area can help you with this. I personally would stick with the flash VY PCM.
Re: vt and vy engine wiring loom swap
Posted: Fri May 17, 2013 10:14 am
by drippy
I'm in Geelong, Vic, I know I can get a Kelmaker tune but I'd rather diy it lol more satisfaction.
I'm running an ok tune on the flash pcm at the moment but would like more range on the tables
I'll have to try and follow the wiring diagrams when I get home to see if I can swap looms with minimal effort otherwise it will be a Saturday in the shed repinning the vy loom
Re: vt and vy engine wiring loom swap
Posted: Fri May 17, 2013 2:43 pm
by Holden202T
do the enhanced bins The1 made not satisfy your extra range needs ?
Re: vt and vy engine wiring loom swap
Posted: Fri May 17, 2013 5:16 pm
by drippy
havent really looked at them... i mite check them out now. ive sent my charger away to get serviced so ive got a week or 2 before ill be boosting again, mite have a play with them bins before i change
it will be running around 10psi so will the enhanced bins cover that?