Re: Stock Holden Bin Files
Posted: Thu Jul 08, 2010 5:40 pm
bet that took a while LOL took me ages to zip upload and label them the first time you poor bugger
pcmhacking.net
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
Stock Holden Bin Files
Page 2 of 2
Re: Stock Holden Bin Files
Posted: Sun Dec 12, 2010 11:55 am
CYJN and DRRS have been added, thanks to Monaro253.
Re: Stock Holden Bin Files
Posted: Mon Mar 21, 2011 8:47 am
BMZB Added, thanks to VX L67 Getrag
Re: Stock Holden Bin Files
Posted: Fri May 27, 2011 10:17 pm
A couple of LS1 HSV tunes added
Re: Stock Holden Bin Files
Posted: Sat Nov 26, 2011 5:32 pm
my VXII bin file whos got the xdf 
Re: Stock Holden Bin Files
Posted: Sun Nov 25, 2018 7:26 pm
Any ideas on what should be used in a 96' VS grange? When I got it, it was fitted with a BWCT 424' PCM (5.7lt auto) that had a BWFW memcal (5lt manual). It didn't drive too good like that...
I believe that the motor is a 5lt and not the 5.7lt but not sure.
I fitted a standard 5lt auto 424' to make the auto happy, it doesn't have the correct knock board though.
The best I can come up with is BSAK, anyone else agree?
I believe that the motor is a 5lt and not the 5.7lt but not sure.
I fitted a standard 5lt auto 424' to make the auto happy, it doesn't have the correct knock board though.
The best I can come up with is BSAK, anyone else agree?
Re: Stock Holden Bin Files
Posted: Sun Nov 25, 2018 9:19 pm
Bmzm and disable knock via the temp scaler.does it have the bluetop injectors
Re: Stock Holden Bin Files
Posted: Mon Nov 26, 2018 6:48 am
It's fitted with orange top injectors, why do you suggest BMZM?
BWCT isn't listed, I'll get a read from it and post it up.
BWCT isn't listed, I'll get a read from it and post it up.
Re: Stock Holden Bin Files
Posted: Mon Nov 26, 2018 12:46 pm
Bmzm is what I use for auto strokers as a base