Re: LSx Coil Driver
Posted: Mon May 23, 2016 9:24 pm
What brand are these units and where do you get them? Cheers
pcmhacking.net
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
LSx Coil Driver
Page 8 of 16
Re: LSx Coil Driver
Posted: Mon May 23, 2016 9:28 pm
Contact VL400 he builds them.
Re: LSx Coil Driver
Posted: Mon May 23, 2016 9:32 pm
Ok thanks
Re: LSx Coil Driver
Posted: Fri Sep 02, 2016 3:25 pm
Will this allow me to run 8 coils on a 5l?
Re: LSx Coil Driver
Posted: Fri Sep 02, 2016 6:13 pm
nope, you'd need to get the full blown ignition module.
Re: LSx Coil Driver
Posted: Fri Sep 02, 2016 6:27 pm
Which is this one .. http://pcmhacking.net/forums/viewtopic.php?f=11&t=2913
You need a VT dizzy for 8 coils as the factory pre-VT dizzy has no home/sync signal to allow more than one coil.
You need a VT dizzy for 8 coils as the factory pre-VT dizzy has no home/sync signal to allow more than one coil.
Re: LSx Coil Driver
Posted: Fri Feb 23, 2018 8:00 am
Can anyone confirm the factory dwell time on a VS Ecotec? Setting up VL400s coil driver with some monster coils and treading carefully
Re: LSx Coil Driver
Posted: Fri Feb 23, 2018 12:00 pm
Here you go, all V6s are the same from the bins I have checked of various models ...
Re: LSx Coil Driver
Posted: Fri Feb 23, 2018 12:35 pm
Awesome support as always thanks VL400 
Re: LSx Coil Driver
Posted: Sat Feb 24, 2018 10:55 am
Rowan who fitted your Coil Driver set up using 6 x IGN 1A Coils gave some really good feedback on Facebook.VL400 wrote:Am waiting for delcowizzids fuel economy reportWould be nice to see some extra economy with the extra spark energy lighting the LC mixtures.
Unfortunately I wish it was up on here as it is hard to find on FB if you want to look the info & pics over again.