VS COMMODORE PROJECT
Re: VS COMMODORE PROJECT
Im a v8 man really lol ,its coming out today ill get some pics up soon.
Re: VS COMMODORE PROJECT
Well v6 is out just gotta change crossmember
and a couple things and clean the bay and the 304 is ready to drop in.
and a couple things and clean the bay and the 304 is ready to drop in.
Last edited by v8-tuning on Tue Feb 24, 2015 6:16 pm, edited 1 time in total.
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: VS COMMODORE PROJECT
Your gonna have to remove that AC pump as it's totally different and in the wrong spot for the 304.
Re: VS COMMODORE PROJECT
No shit lol and the x member
I got all the parts I need from the 304 Calais,i stripped it pretty good lol.
I got all the parts I need from the 304 Calais,i stripped it pretty good lol.
Re: VS COMMODORE PROJECT
Well its 90% done ,been a massive job
It has the entire Calais loom minus abs, it now has the high bcm
level 3 dash/trip computer and power windows wiring is all there.
The climate control all works-just have to regas the the system.
Starts and runs great,started 1st go.
The engine had a clean/respray ,
Few mods,70mm tb,k&n filter,ngk iridium plugs and few new hoses
bits and pieces and 160deg thermostat.
Also runs a bf single fan which covers the radiator core perfectly and moves some air!
Has pacmakers,100 cell cat and red back 2.5" system all bolt on-no welding.
Got plenty of mods planned,eg suspension.brakes and another interior
and prob the diff next from 3:08 open to 3.9 lsd.
It has the entire Calais loom minus abs, it now has the high bcm
level 3 dash/trip computer and power windows wiring is all there.
The climate control all works-just have to regas the the system.
Starts and runs great,started 1st go.
The engine had a clean/respray ,
Few mods,70mm tb,k&n filter,ngk iridium plugs and few new hoses
bits and pieces and 160deg thermostat.
Also runs a bf single fan which covers the radiator core perfectly and moves some air!
Has pacmakers,100 cell cat and red back 2.5" system all bolt on-no welding.
Got plenty of mods planned,eg suspension.brakes and another interior
and prob the diff next from 3:08 open to 3.9 lsd.
Re: VS COMMODORE PROJECT
I managed to get some pics.
Its turned out pretty good for a budget build.
Its turned out pretty good for a budget build.
Last edited by v8-tuning on Tue Feb 24, 2015 6:16 pm, edited 1 time in total.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VS COMMODORE PROJECT
looks pretty clean!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: VS COMMODORE PROJECT
Thanks,took it to wsid has run 15.0 with the 3:08 open centre
Got an oil leak so prob would have run 14.9 if it wasn't for that.
Full weight and 3/4 tank of fuel,was fairly hot too in the arvo.
Needs some shorter gearing and lsd next.
Got an oil leak so prob would have run 14.9 if it wasn't for that.
Full weight and 3/4 tank of fuel,was fairly hot too in the arvo.
Needs some shorter gearing and lsd next.
Re: VS COMMODORE PROJECT
Defintlely need a lsd .
Last edited by v8-tuning on Tue Feb 24, 2015 6:17 pm, edited 1 time in total.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VS COMMODORE PROJECT
Was the from the 29th of sept ??? I'm sure I remember seeing that car there!!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread