EFI Torana
-
- Posts: 50
- Joined: Thu Jun 27, 2013 10:05 am
- cars: Torana LH VN 5.0
EFI Torana
This is my ride...
Where is started
to now
Started out with standard 304
This is where im now....
Where is started
to now
Started out with standard 304
This is where im now....
Re: EFI Torana
sweet ride you got there
going by the lights looks like a LX
What mods have you done to the engine and what ECU are you running
going by the lights looks like a LX
What mods have you done to the engine and what ECU are you running
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: EFI Torana
Awesome car, big fan of of LH/LX torries Looks neat as, the new intake suits it much better than the banana's
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: EFI Torana
Very nice, looks much better with the TP manifold fitted.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: EFI Torana
if memory serves me correctly only the 4 cylinder and SLR etc had the round headlights, all the rest had the square ones.trikky73 wrote:sweet ride you got there
going by the lights looks like a LX
What mods have you done to the engine and what ECU are you running
that was one thing i was stoked with then i got mine as it was a 4 cylinder so had the round headlights!
regardless, they look good either way and i must say this one has been suitable rescued!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 50
- Joined: Thu Jun 27, 2013 10:05 am
- cars: Torana LH VN 5.0
Re: EFI Torana
Its a LH with a SLR body kit. Square headlights. The LX came out with the round one's
No mods to the engine. Just a 304 with a TP manifold. Got a 12P ecu.
Was going to put a 355 Stroker in it but changed my mind and might put a LS1 in it now..
No mods to the engine. Just a 304 with a TP manifold. Got a 12P ecu.
Was going to put a 355 Stroker in it but changed my mind and might put a LS1 in it now..
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: EFI Torana
if only the ls1 sounded like a 304 everyone would have one.oh wait they do now LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: EFI Torana
I'd stroke it,they sound real nice the holden v8s.
very Nice torana!
very Nice torana!
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: EFI Torana
yeah I guess theres a bit of a trade off, LSx might be more power for cheaper, but then you have to get it in there first which represents a whole extra cost....
plus you already have the good bits you need for the 304 to work well, just need a good bottom end and suitable cam and it should be a beast!
plus you already have the good bits you need for the 304 to work well, just need a good bottom end and suitable cam and it should be a beast!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: EFI Torana
or get the new block thats about to be released 427 cube holden v8 anyone
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem