Injector Flow Testing Data

Information and discussion of EFI hardware and specifications
tomz
Posts: 13
Joined: Thu Apr 22, 2021 10:48 pm

Re: Injector Flow Testing Data

Post by tomz »

hi I am interested in getting some injectors tested are you able to test some for me by any chance.
They are chinese l67 knock offs have a set installed but putting L67 injector numbers in the Tune doesnt seem to be adding up on the results I am seeing.
I suspect the opening times are slower than what I am expecting....
User avatar
delcowizzid
Posts: 5535
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Injector Flow Testing Data

Post by delcowizzid »

Throw them in the bin and buy some quality injectors
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
The1
Posts: 4691
Joined: Mon Jan 04, 2010 10:23 am

Re: Injector Flow Testing Data

Post by The1 »

yep as above, i did a video comparing them ages ago. At low pressure particularly it highlighted how bad the holes are drilled/machined.

[youtube]https://www.youtube.com/watch?v=X7CfPe-P_9Y[/youtube]
In-Tech
Posts: 785
Joined: Mon Mar 09, 2020 4:35 pm
Location: California

Re: Injector Flow Testing Data

Post by In-Tech »

sorry to butt in, The1. You are absolutely correct how bad the aftermarket crapola is. It's very sad how consumers think they paid all the money and are duped :(
User avatar
The1
Posts: 4691
Joined: Mon Jan 04, 2010 10:23 am

Re: Injector Flow Testing Data

Post by The1 »

with Bosch especially it is near impossible visually to tell the fakes from the genuines. It's only until you test them.
Post Reply