Re: Injector Flow Testing Data
Posted: Wed Jan 21, 2015 3:51 pm
Glad i found this, so who am i sending my injectors to? The local places want crack money haha
pcmhacking.net
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
Injector Flow Testing Data
Page 15 of 24
Re: Injector Flow Testing Data
Posted: Wed Jan 21, 2015 3:55 pm
it's a black art isn't it?
Re: Injector Flow Testing Data
Posted: Fri Mar 20, 2015 8:16 pm
Re: Injector Flow Testing Data
Posted: Fri Mar 20, 2015 9:02 pm
Have something weird on my own car. 2000rpm 50kpa.
One day VE is lean next day it's rich.
Modified 304 blue too injectors factory pump and reg.
Never been able to narrow down where the variation comes from.
Possibly the reg?
One day VE is lean next day it's rich.
Modified 304 blue too injectors factory pump and reg.
Never been able to narrow down where the variation comes from.
Possibly the reg?
Re: Injector Flow Testing Data
Posted: Fri Mar 20, 2015 9:47 pm
weather is the biggest contributer hence closed loop BLM's that change every day but not generally at one rpm range could well just be injection pulsewidth correction out for a certian pulsewidth
Re: Injector Flow Testing Data
Posted: Sat Mar 21, 2015 10:05 am
Was pretty tight at that rpm maybe 1800 2000 40 50 kpa. I just lived with it wasn't much in it maybe. 5 afr.
Whole table was very close. It's in the 12P custom thread VR288 think it called.
Whole table was very close. It's in the 12P custom thread VR288 think it called.
Re: Injector Flow Testing Data
Posted: Sat Mar 21, 2015 12:27 pm
with MAF setups ive seen 15% swings at times between winter and summer temps.
Re: Injector Flow Testing Data
Posted: Sat Mar 21, 2015 3:41 pm
mine are rock steady regardless of weather. only place it varies a little is idle AFRs. not much, probably only 0.2-0.5 AFR from day to day. As soon as its off idle is virtually perfect everywhere.
I got my injectors done by The1 so i have it all calibrated.
I got my injectors done by The1 so i have it all calibrated.
Re: Injector Flow Testing Data
Posted: Sat Mar 21, 2015 11:30 pm
Anyone here use an IAT sensor? Those tables help adjust fuel flow based on air temps.
Re: Injector Flow Testing Data
Posted: Sun Mar 22, 2015 9:26 pm
on ours here it's spark adjustment on MAF based pcms.