Im after the connector found under the steering column in a VR VS Commodore. I think the correct name is OBD port.
I found them brand new on ebay for $2 with pins for wiring but would rather a local supplier.
Im going to be wiring it into a VK Commodore running a VR ECU. This will be for connecting to the ECU.
VR VS Diagnostic Port
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VR VS Diagnostic Port
Go here https://www.eficonnection.com/eficonnec ... fault.aspx and search for "diagnostic"
Good parts from this place every time I've got them!
Good parts from this place every time I've got them!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- vlad01
- Posts: 7803
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: VR VS Diagnostic Port
me too, I built all my looms using them for the hardware. Their stuff is good.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.