KE70 track car project
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VT circuit race car
if you look closely on the passenger side under the dash on the black area (just above the white firewall part) in the below video you can see the one i'm talking about.....
this is a 202 with carby, delco for spark, and VL400's module running 1 LS1 coil into the dizzy cap.
[youtube]http://www.youtube.com/watch?v=Rd7o3w1epTs[/youtube]
this one shows the 2 step rev limiter in action at the drags allows full throttle launches very nicely!
[youtube]http://www.youtube.com/watch?v=r4ezd6WbDoE[/youtube]
and here you can hear in the burnout it just tapped the limiter too
[youtube]http://www.youtube.com/watch?v=8EGEY9gb3q8[/youtube]
this is a 202 with carby, delco for spark, and VL400's module running 1 LS1 coil into the dizzy cap.
[youtube]http://www.youtube.com/watch?v=Rd7o3w1epTs[/youtube]
this one shows the 2 step rev limiter in action at the drags allows full throttle launches very nicely!
[youtube]http://www.youtube.com/watch?v=r4ezd6WbDoE[/youtube]
and here you can hear in the burnout it just tapped the limiter too
[youtube]http://www.youtube.com/watch?v=8EGEY9gb3q8[/youtube]
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VT circuit race car
oh and of course static testing before we went racing hehehe
[youtube]http://www.youtube.com/watch?v=qNO07XVkxY0[/youtube]
sorry i'll stop flooding your thread!
[youtube]http://www.youtube.com/watch?v=qNO07XVkxY0[/youtube]
sorry i'll stop flooding your thread!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- krusty
- Posts: 570
- Joined: Wed Jan 27, 2010 9:45 pm
- cars: VY Calais guzzler, Toyota Corolla almost hybrid
- Location: Melbourne, VIC
Re: VT circuit race car
Lol!!! Flood away.... I'm just drooling a little but that's not a bad thing sometimes. Good motivationHolden202T wrote:oh and of course static testing before we went racing hehehe
[youtube]http://www.youtube.com/watch?v=qNO07XVkxY0[/youtube]
sorry i'll stop flooding your thread!
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VT circuit race car
hahaha glad I could assist
I can post a lot more videos, not really related to that module though hahaha
I can post a lot more videos, not really related to that module though hahaha
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- krusty
- Posts: 570
- Joined: Wed Jan 27, 2010 9:45 pm
- cars: VY Calais guzzler, Toyota Corolla almost hybrid
- Location: Melbourne, VIC
Re: VT circuit race car
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VT circuit race car
wont be fitting them under a 15" chaser
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- krusty
- Posts: 570
- Joined: Wed Jan 27, 2010 9:45 pm
- cars: VY Calais guzzler, Toyota Corolla almost hybrid
- Location: Melbourne, VIC
Re: VT circuit race car
hahahaha, damn right! I want to be chased anyways not the other way roundHolden202T wrote:wont be fitting them under a 15" chaser
Corny I know but you get the drift
- vlad01
- Posts: 7804
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: VT circuit race car
Are we going to see it poll vault over the front wheels?
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- krusty
- Posts: 570
- Joined: Wed Jan 27, 2010 9:45 pm
- cars: VY Calais guzzler, Toyota Corolla almost hybrid
- Location: Melbourne, VIC
Re: VT circuit race car
Dunno about that, would be more like a Ju Jitsu break fall I'd imagine if the pedal was mashed too hard haha!vlad01 wrote:Are we going to see it poll vault over the front wheels?