FS: ECM NVRAM Conversion (VN to VS but not VS Ecotec)
Posted: Thu Jun 26, 2014 10:55 pm
ECM NVRAM Conversion
Contact Gareth to order ECU NVRAM'S.
There are currently 30 in stock as at March 2024
Suitable for ECMs with these service numbers
1227808 (the '808)
16176424 (the '424)
16183082
16206305
16195699
These ECMs were used in these applications:
Commodore/Statesman VN/VP All (use with ECM comms board)
VR All (Use with ALDL interface)
VS V8 Except Series 3 (Use with ALDL interface)
N13 Pulsar
LD Astra
JE Camira
For a full compatibility matrix see the hardware and software guide here http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Usage
These NVRAM kits are used to replace the factory memcal and enable real time tuning with 11P, 12P or realtime factory software. The most suitable base tune will be installed on the NVRAM and it will be tested prior to shipping.
You will need to solder 1 wire inside the ECM to use the realtime functionality. Instructions are provided with purchase.
Beware the clones
PCMHACKING.net products use only genuine components. The NVRAM is genuine Dallas/Maxim and is the industrial version which can withstand high cabin temperatures. They also include a high quality battery which provides long life (10 years after first use). For more information on clones, see http://pcmhacking.net/forums/viewtopic.php?f=7&t=2685
More information
If you need more information about the use of this hardware, click the FAQ button at the top/right of the forums and have a read of the documents available for download there.
Purchasing
ECM NVRAMs are priced at $270 inc. postage and handling.
To order PM Gareth.
Contact Gareth to order ECU NVRAM'S.
There are currently 30 in stock as at March 2024
Suitable for ECMs with these service numbers
1227808 (the '808)
16176424 (the '424)
16183082
16206305
16195699
These ECMs were used in these applications:
Commodore/Statesman VN/VP All (use with ECM comms board)
VR All (Use with ALDL interface)
VS V8 Except Series 3 (Use with ALDL interface)
N13 Pulsar
LD Astra
JE Camira
For a full compatibility matrix see the hardware and software guide here http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Usage
These NVRAM kits are used to replace the factory memcal and enable real time tuning with 11P, 12P or realtime factory software. The most suitable base tune will be installed on the NVRAM and it will be tested prior to shipping.
You will need to solder 1 wire inside the ECM to use the realtime functionality. Instructions are provided with purchase.
Beware the clones
PCMHACKING.net products use only genuine components. The NVRAM is genuine Dallas/Maxim and is the industrial version which can withstand high cabin temperatures. They also include a high quality battery which provides long life (10 years after first use). For more information on clones, see http://pcmhacking.net/forums/viewtopic.php?f=7&t=2685
More information
If you need more information about the use of this hardware, click the FAQ button at the top/right of the forums and have a read of the documents available for download there.
Purchasing
ECM NVRAMs are priced at $270 inc. postage and handling.
To order PM Gareth.