FS: USB ALDL Interface
Posted: Sat Jun 28, 2014 4:51 pm
Gareth can supply. Send a msg to order USB ALDLs.
Suitable for applications with ALDL available on pin 9 of an OBD port.
For Engine and 4L60E transmission logging, or realtime tuning on NVRAM equipped vehicles this includes:
VR to VY Commodores, except LS1 V8.
This cable is still good for limited body functionality on VY and VZ with LS1 or L98 V8 engines.
Design
The interface is the latest revision of VL400s design, which includes a genuine FTDI chip, signal filtering and regeneration.
The included USB cable includes a ferrite bead for maximum noise immunity (often required when being used near big sparks, such as boost applications or a misfiring engine).
In the kit
1x USB ALDL Cable
1x Shielded USB cable with ferrite bead.
Beware the clones
PCMHACKING.net products use only genuine components. Our ECM Comms boards use a genuine FTDI chip which works fine with the latest drivers. Clone FTDI chips are in circulation. See here for more information http://hackaday.com/2014/02/19/ft232rl-real-or-fake/
More information
If you need more information about the use of this hardware, click the FAQ button at the top/right of the forums and have a read of the documents available for download there.
Purchasing
USB ALDL Interfaces are $120 inc. postage and handling.
Suitable for applications with ALDL available on pin 9 of an OBD port.
For Engine and 4L60E transmission logging, or realtime tuning on NVRAM equipped vehicles this includes:
VR to VY Commodores, except LS1 V8.
This cable is still good for limited body functionality on VY and VZ with LS1 or L98 V8 engines.
Design
The interface is the latest revision of VL400s design, which includes a genuine FTDI chip, signal filtering and regeneration.
The included USB cable includes a ferrite bead for maximum noise immunity (often required when being used near big sparks, such as boost applications or a misfiring engine).
In the kit
1x USB ALDL Cable
1x Shielded USB cable with ferrite bead.
Beware the clones
PCMHACKING.net products use only genuine components. Our ECM Comms boards use a genuine FTDI chip which works fine with the latest drivers. Clone FTDI chips are in circulation. See here for more information http://hackaday.com/2014/02/19/ft232rl-real-or-fake/
More information
If you need more information about the use of this hardware, click the FAQ button at the top/right of the forums and have a read of the documents available for download there.
Purchasing
USB ALDL Interfaces are $120 inc. postage and handling.