FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67)
Posted: Sat Jun 28, 2014 6:20 pm
PCM NVRAM Conversion
Contact Gareth to order PCM NVRAM'S.
As of March 2024 there is 30 in stock
Suitable for PCMs with these service numbers:
16208257
16199728
16210672
16234531
16210480
16233396
For a full compatibility matrix see the hardware and software guide here http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
These PCMs were used in these applications:
VS Ecotec - Normally Aspirated and Supercharged.
VS V8 Auto Series 3 (MAF engine).
VT V6 (Normally Aspirated and Supercharged*), V8 (except series 2, LS1)
VX Supercharged
Note Supercharged tunes suit boosted applications, including turbo.
Usage
These NVRAM kits are used to replace the factory memcal and enable real time tuning with The1s extended software or realtime factory software. The most suitable base tune will be installed on the NVRAM and it will be tested prior to shipping.
Beware the clones
PCMHACKING.net products use only genuine components. The NVRAM is genuine Dallas/Maxim and is the industrial version which can withstand high cabin temperatures. They also include a high quality battery which provides long life (10 years after first use). For more information on clones, see http://pcmhacking.net/forums/viewtopic.php?f=7&t=2685
More information
If you need more information about the use of this hardware, click the FAQ button at the top/right of the forums and have a read of the documents available for download there.
Purchasing
PCM NVRAMs are $270 AUD each plus postage and handling.
To go with your NVRAM you will require an ALDL interface - http://pcmhacking.net/forums/viewtopic.php?f=14&t=3616
PCMHACKING.net ALDL interfaces are the only interfaces that are guaranteed to work with our NVRAM.
If you wish to purchase one of these PCM NVRAMs contact Gareth via PM.
Contact Gareth to order PCM NVRAM'S.
As of March 2024 there is 30 in stock
Suitable for PCMs with these service numbers:
16208257
16199728
16210672
16234531
16210480
16233396
For a full compatibility matrix see the hardware and software guide here http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
These PCMs were used in these applications:
VS Ecotec - Normally Aspirated and Supercharged.
VS V8 Auto Series 3 (MAF engine).
VT V6 (Normally Aspirated and Supercharged*), V8 (except series 2, LS1)
VX Supercharged
Note Supercharged tunes suit boosted applications, including turbo.
Usage
These NVRAM kits are used to replace the factory memcal and enable real time tuning with The1s extended software or realtime factory software. The most suitable base tune will be installed on the NVRAM and it will be tested prior to shipping.
Beware the clones
PCMHACKING.net products use only genuine components. The NVRAM is genuine Dallas/Maxim and is the industrial version which can withstand high cabin temperatures. They also include a high quality battery which provides long life (10 years after first use). For more information on clones, see http://pcmhacking.net/forums/viewtopic.php?f=7&t=2685
More information
If you need more information about the use of this hardware, click the FAQ button at the top/right of the forums and have a read of the documents available for download there.
Purchasing
PCM NVRAMs are $270 AUD each plus postage and handling.
To go with your NVRAM you will require an ALDL interface - http://pcmhacking.net/forums/viewtopic.php?f=14&t=3616
PCMHACKING.net ALDL interfaces are the only interfaces that are guaranteed to work with our NVRAM.
If you wish to purchase one of these PCM NVRAMs contact Gareth via PM.