Page 4 of 5
Re: Replace Flash PCM With VX/VY S/C PCM
Posted: Mon Aug 10, 2015 11:23 am
by 0081
I remember about someone on here using a ostrich or something like that a while ago to real time tune the flash PCM cant remember much about it tho.
The1 is possible to socket a flash pcm and run a nvram of some kind for real time tuning or does the PCM not allow it at all ?
Re: Replace Flash PCM With VX/VY S/C PCM
Posted: Mon Aug 10, 2015 12:34 pm
by antus
Its possible but its hard to build. The flash chip from memory is hard soldered in so you need to do a lot of fine soldering for nvram or ostrich connection. The Kalmaker realtime hardware is the same. If they dont advertise it anymore its probably because its not worth it or has to be too expensive for them to build the hardware.
For vx/vy your probably better of tuning it non-realtime. Log your data, make your changes, flash, re-test and repeat.
Re: Replace Flash PCM With VX/VY S/C PCM
Posted: Mon Aug 10, 2015 12:52 pm
by OZ38
antus wrote:
For vx/vy your probably better of tuning it non-realtime. Log your data, make your changes, flash, re-test and repeat.
>> 0081 - This is what your currently doing with your Flash PCM equipped S/C VY V6 isn't it ?
Cheers
Re: Replace Flash PCM With VX/VY S/C PCM
Posted: Mon Aug 10, 2015 1:11 pm
by 0081
OZ38 wrote:antus wrote:
For vx/vy your probably better of tuning it non-realtime. Log your data, make your changes, flash, re-test and repeat.
>> 0081 - This is what your currently doing with your Flash PCM equipped S/C VY V6 isn't it ?
Cheers
Yep that's what I'm currently doing but having real time would be very useful for some things.
Re: Replace Flash PCM With VX/VY S/C PCM
Posted: Fri Aug 26, 2016 7:44 pm
by hsv08
The1 have you got pictures of where it connect to the plug ends of the flash PCM? Have you got connectors on there or soldered the wire straight to the pins?
Re: Replace Flash PCM With VX/VY S/C PCM
Posted: Fri Aug 26, 2016 7:54 pm
by The1
if you check the first picture the black heatshrink is the wires soldered to the pin wires.
Re: Replace Flash PCM With VX/VY S/C PCM
Posted: Fri Aug 26, 2016 8:08 pm
by hsv08
The1 wrote:if you check the first picture the black heatshrink is the wires soldered to the pin wires.
I thought that maybe the case. I have found these
http://nz.rs-online.com/web/p/products/6805179/ that i thought may work with it. im not hugely confident in soldering the wires straight to the pins themselves and having them stay put.
Re: Replace Flash PCM With VX/VY S/C PCM
Posted: Fri Aug 26, 2016 8:23 pm
by The1
i always solder lol, dont want chance of dodgy connections
Re: Replace Flash PCM With VX/VY S/C PCM
Posted: Fri Sep 16, 2016 9:14 am
by psyolent
hey..............any chance that XLSX is available please
EDIT : NVM going blind in my old age.
Re: Replace Flash PCM With VX/VY S/C PCM
Posted: Sun Sep 18, 2016 9:48 pm
by psyolent
god damn. you really have to want to do this.
note ; if you are going to use in a later model (like vx) get the ECU plugs from a vt berlina or calais ... as they have things like the PRND321 indicators