Page 1 of 6
FS: VN-VY Memcal & Adaptors
Posted: Thu Jul 17, 2014 8:33 pm
by The1
NO LONGER FOR SALE, LACK OF INTEREST AND SALES.
Guide for using memcal burner adapters in the FAQ same link below, see "EEPROM Burning Bin Stacking and Verifying Data Guide.pdf"
viewtopic.php?f=7&t=1396&p=15255#p15255
Product
https://www.greenliant.com/products/?inode=40846
Datasheet
https://www.greenliant.com/dotAsset/40840.pdf
VN - VR Memcal to Burner Adaptor
$30
- VN - VR Adaptor.JPG (87.87 KiB) Viewed 36004 times
VS - VY Memcal to Burner Adaptor
$30
- VS - VY Adaptor.JPG (132.03 KiB) Viewed 36004 times
VN - VY Memcal to Burner Adaptors
$55
- VN - VY Adaptors.JPG (159.33 KiB) Viewed 36004 times
VS - VY Memcal
- IMG_9957.jpg (102.68 KiB) Viewed 35899 times
$35[/size][/b]
Re: FS: The1's Memcal & Adaptors
Posted: Mon Aug 04, 2014 7:48 pm
by The1
SST Chips now latest revision, MTP badged, datasheet attached refers to going lead free. Still the same item and quality.
Re: FS: The1's Memcal & Adaptors
Posted: Tue Aug 05, 2014 12:01 pm
by vlad01
Do you sell the chips by them selves?
Re: FS: The1's Memcal & Adaptors
Posted: Tue Aug 05, 2014 12:23 pm
by The1
$5 per chip, discount over 50.
Re: FS: The1's Memcal & Adaptors
Posted: Tue Aug 05, 2014 4:51 pm
by vlad01
Cool, so those with the VN-VR apter I can make memcals with final tune of 12P using the GQ-4X ?
Re: FS: The1's Memcal & Adaptors
Posted: Tue Aug 05, 2014 9:06 pm
by The1
Yep whack your stock memcal on it in the burner and burn it same as having it directly in the socket
Re: FS: The1's Memcal & Adaptors
Posted: Wed Aug 06, 2014 12:08 am
by antus
just keep in mind you'll need a large enough chip on the memcal. 12p is a 32kbyte file, vn/vp memcals are a 16kbyte chip and would need the sst chip also sold above.
Re: FS: The1's Memcal & Adaptors
Posted: Wed Aug 06, 2014 12:30 am
by delcowizzid
ill pull the pin on 10 eeproms at $5 each im sick of using up the scraps lol
Re: FS: The1's Memcal & Adaptors
Posted: Wed Aug 06, 2014 11:06 am
by vlad01
antus wrote:just keep in mind you'll need a large enough chip on the memcal. 12p is a 32kbyte file, vn/vp memcals are a 16kbyte chip and would need the sst chip also sold above.
Of course, thats why i asked about the chips. the stock ones are too small and need UV eraser which I dont have.
Re: FS: The1's Memcal & Adaptors
Posted: Wed Aug 06, 2014 8:49 pm
by The1
would these not work on VN-VR memcals though being 32pin? You would require 28pin chips? I did have some 512 ones at one point, I could ask again and see if I can get more if there is demand.