pcmhacking.net

NO LONGER FOR SALE, LACK OF INTEREST AND SALES.

Guide for using memcal burner adapters in the FAQ same link below, see "EEPROM Burning Bin Stacking and Verifying Data Guide.pdf"
viewtopic.php?f=7&t=1396&p=15255#p15255

Product
https://www.greenliant.com/products/?inode=40846
Datasheet
https://www.greenliant.com/dotAsset/40840.pdf

VN - VR Memcal to Burner Adaptor

$30 VS - VY Memcal to Burner Adaptor

$30 VN - VY Memcal to Burner Adaptors

$55 VS - VY Memcal $35[/size][/b]

SST Chips now latest revision, MTP badged, datasheet attached refers to going lead free. Still the same item and quality.

Do you sell the chips by them selves?

$5 per chip, discount over 50.

Cool, so those with the VN-VR apter I can make memcals with final tune of 12P using the GQ-4X ?

Yep whack your stock memcal on it in the burner and burn it same as having it directly in the socket

just keep in mind you'll need a large enough chip on the memcal. 12p is a 32kbyte file, vn/vp memcals are a 16kbyte chip and would need the sst chip also sold above.

ill pull the pin on 10 eeproms at $5 each im sick of using up the scraps lol

antus wrote:just keep in mind you'll need a large enough chip on the memcal. 12p is a 32kbyte file, vn/vp memcals are a 16kbyte chip and would need the sst chip also sold above.

Of course, thats why i asked about the chips. the stock ones are too small and need UV eraser which I dont have.

would these not work on VN-VR memcals though being 32pin? You would require 28pin chips? I did have some 512 ones at one point, I could ask again and see if I can get more if there is demand.