Page 1 of 3
M1.5.4
Posted: Tue Oct 07, 2014 12:20 am
by DieselBob
Had a chance to run through some code here's the .bin and .xdf
Very basic tables with headers no table function yet.
No scalars or constants, done a diss-assembly only had a quick look very similar to the M1.7.
Edit
Thanks Festy had a look.
2 Tables had parameters I haven't seen before.
Fixed.
Re: M1.5.4
Posted: Tue Oct 07, 2014 11:58 am
by festy
Those tables don't look quite right in that XDF?
I ran the bin through my XDF generator and here's what it spat out.
Re: M1.5.4
Posted: Tue Oct 07, 2014 4:12 pm
by Charlescrown
Hey Festy what program do you use to generate XDF files?
Re: M1.5.4
Posted: Tue Oct 07, 2014 4:54 pm
by festy
It's a Perl script that I wrote myself, it only works on Bosch Motronic bins though.
Re: M1.5.4
Posted: Thu Oct 09, 2014 6:11 pm
by zhivat
Nice Festy... Do you have the adx for this? Want to learn more about this motronic...
Really appreciate it....
Re: M1.5.4
Posted: Thu Oct 09, 2014 6:33 pm
by festy
Assuming
my plug-in can communicate with the ECU (you'll need a KKL cable), try this ADX as a starting point.
Re: M1.5.4
Posted: Thu Oct 09, 2014 7:25 pm
by zhivat
I saw KKL cable is OBD2 (16 pin) while mine is Opel OBD1 (10pin), how to solve this port?
Re: M1.5.4
Posted: Thu Oct 09, 2014 7:47 pm
by festy
You'll need an adapter cable. Does
this one look like what you're after?
Re: M1.5.4
Posted: Thu Oct 09, 2014 11:15 pm
by zhivat
Ok, thanks Festy, I will try it and see what I got....
Btw, what scanning tool (handheld) can work with this ECU?
Re: M1.5.4
Posted: Fri Oct 10, 2014 6:58 am
by festy
The only handheld scanners I know of are the original dealer Examiner units, but you might get a better answer from an Opel forum.