pcmhacking.net

OTG is wiring, you need the OTG cable inline with the usb cable to the interface. The FTDI chip (assuming that is a pcmhacking interface) is supported in android. If its not a pcmhacking interface it'll depend what chip is in it. The Jaycar link is for an sdcard reader, its not the otg cable you need. This is the one you need https://www.jaycar.com.au/usb2-0-otg-fe ... g/p/WC7725 but check the phone end is the right connector for your phone. If its not go to ebay for the same kind of thing but with the right connector. P30 looks like usb c and the pic on the jaycar one looks like micro usb. I'd suggest something like this, its in AU. I have no affiliation with the seller and have not used this one, it just came up in a search. https://www.ebay.com.au/itm/353764957918 Also some phones (samsung) come with this adapter, if you have a recent samsung or maybe the huawei had one too and you might have it in a draw somewhere.

Antus thanks for the help.
You guys going to laugh at me cleaned my phone charging port and now it works.
The ammount of stuff that come out of there lol

It is amazing what comes out isn't it.

Clean it every 6 months or so but looks like was well overdue hehe

I have to clean my phone fairly much every week after my last shift at work. Paper dust is a bitch.

Interesting, first time I'm hearing that's the issue but I sure will have to keep that in mind from now Glad you got it working again!

Back in action again
Thanks guys

Is that a 304 with Banana's manifold?

Are you looking at the MAT value lol
Its a l67 in a vr with mat in lower intake manifold
Standard boost for now

Ok.

Still bloody warm though. Scary really. Need a good CAI to help keep those temps in check.