Page 1 of 1

Ford XH ute BCM, whats it good for

Posted: Thu Jan 15, 2015 4:23 pm
by VX L67 Getrag
Howdy all,

Had a issue with an XH ute not starting today & found water leaking on the BCM & gave it a hit & all good.

But then just for sh%$'s & giggles I thought I'd put a smartlock disable on the PCM & then remove the BCM & see how everything works with just bridging the starter control through BCM.

I just drove it home & everything works as normal, central locking(no remote for it supplied so not sure there), indicators & even the electric cooling & heater fans.

So what is it really good for, guessing just a security device really.

The AU that I had an issue with a month ago needed the BCM for the cooling fans, but this 1 at least had low speed & pretty sure high speed.
It is a very basic model too without climate control or anything but there is around 40 wires going to the BCM so it must have more stuff that it controls but I just couldn't find what wasn't working!

Re: Ford XH ute BCM, whats it good for

Posted: Thu Jan 15, 2015 6:35 pm
by Gareth
In answer to your title - nothing :lol:

I have diagrams for these at work, i can have a look tomorrow if you like.

Re: Ford XH ute BCM, whats it good for

Posted: Thu Jan 15, 2015 7:39 pm
by vs ss
In xh Usally the horn, intermittent wipers,timed interior light and of coarse smart lock. The series one did not have a key fob for central lock and In fact the series 1 didn't have central central lock at all unless it was an XR model,so most have a after market kit in them. ( I used to just wire in factory mechanisms and not use the bcm).

So there are bound to be other things but that's all my mind can remember atm :hmm:

Ps the washer also goes through so it turns the wipers on when you press the washers.
Cheers mike.

Re: Ford XH ute BCM, whats it good for

Posted: Thu Jan 15, 2015 9:40 pm
by VX L67 Getrag
LMAO that's kind of what I thought, I'll test those other things tomorrow it's a late 98 manual (with firewall being torn out) model!

Re: Ford XH ute BCM, whats it good for

Posted: Thu Jan 15, 2015 9:42 pm
by vs ss
Hahaha gotta love those firewalls,might as well mount the clutch cable in Swiss cheese. :lol:

Re: Ford XH ute BCM, whats it good for

Posted: Fri Jan 16, 2015 7:46 am
by Charlescrown
I know what you mean about the firewall. I think it comes about as the clutch wears out the pedal effort increases and yea what a design.

Re: Ford XH ute BCM, whats it good for

Posted: Fri Jan 16, 2015 8:19 am
by Gareth
http://www.fordmods.com/documents.php?d=89

That should answer any questions you still have

Re: Ford XH ute BCM, whats it good for

Posted: Fri Jan 16, 2015 10:05 am
by VX L67 Getrag
Yeah firewall may have more stability out of swiss cheese, this 1 had a new clutch a year or so ago & the pedal is even harder with that clutch!
Now with water coming from there or the windscreen now it's getting to the end of it's life.

Thanks for the info Biggyl, for reference everything still worked even horn but the intermittent wipers didn't work but did on 1 or 2 speed but couldn't park properly!