Stand alone ELM interface
Posted: Sun Mar 08, 2015 6:43 pm
I bought an LCD panel from Mikroelectronica (they are big in embedded development tools in Southern Europe) some time back. It has a stack of analog, digital, UART,
USB I/O and a reasonably powerful PIC microcontroler integrated.
My plan is to use an ELM as an interface, add an EBay GPS and my wide band. Then use the Built in micro SD card to data log as well as the touch screen as a data display.
Most of the GUI coding is sorted except for the PID decoding, and then I found 88 pages by Tazzi. What an absolute legend. I had REVS Speed and spark advance sorted
and was ready to give up.
Back to business.
Cheers: Steve
USB I/O and a reasonably powerful PIC microcontroler integrated.
My plan is to use an ELM as an interface, add an EBay GPS and my wide band. Then use the Built in micro SD card to data log as well as the touch screen as a data display.
Most of the GUI coding is sorted except for the PID decoding, and then I found 88 pages by Tazzi. What an absolute legend. I had REVS Speed and spark advance sorted
and was ready to give up.
Back to business.
Cheers: Steve