pcmhacking.net

Does anyone know if you can convert a kal2 file to work in kal3

The easiest way would be to compare the stock kal2 file to the tuned 1 & then copy differences across whether it's in Kalmaker software or an xdf & thru tunerpro!

Theres an XDF on here for both SP3 and SP2. Also flash tool can get the bin from the Kalmaker SRAM's. Even SP2 version.
If you can post up the BIN other's might be able to help. Maybe even convert to $12P. Could put your values into a 12P BIN.

Do you have the whole Kalmaker ECU and RT board? What softwrae do you have SP2 or SP3. Or just had it tuned elsewhere and burnt to a memcal?

I have the stock SP3 files here but no SP2. If that helps. The SP2 XDF is the N00 one.

As above. But your probably better off converting to 12P to avoid licensing issues and security pals. You'll need to stretch any tables which dont straight up fit (eg VE, spark) with something like excel.

I have a spreadsheet on my laptop done by antus. It has the SP3 sized VE table and converts i to a 12P sized table. Works a treat.
Ive used it for doing some of the old VN based tunes. Only need to make up a couple of rows yourself with them.

If you can post your BIN up I would be glad to look at helping, Im sure others would as well.

I have both sp2 and sp3 I don't use the sp2 anymore because the realtime link was always a bit hit and miss when swapping between ecu's on the v12(1 ecu per bank) where as the sp3 is much better .anyway have uploaded file thanks for the help

Would you be interested in going to 12P? If you can work Kalmaker you can work Tuner Pro easy.
I once had SP3 and hated it after going to 12P and TP5.
You can re burn the Kslmaker SRAM with 12P and use that ecu and real time board.

would be interested What else is needed

It looks like it lines up closest with this & there isn't much to port across whichever way you decide to go!

1 vote for $12p though

thanks I shall consider the 12p