pcmhacking.net

Hey guys I have a vs commo with a l67 in it intercooled blah blah blah any way how do I wire up/install and map sensor to said car ? Any help please

Wiring one in is easy. Using it in calculating fuel is the hard part. Need to go to a Kalmaker set up to keep the standard ecu. Or go to 11P code using a VR auto ecu. Or switch to the enhanced codes on here and retain the maf.

I won't be doing the tune haha
But I do need to know how to wire it up and what not if you could tell me how to do that it would be great
And also where to get one from thanks

Might be best to ask who's doing the tune. I have no Kalmaker information.
So the tuner has asked you to wire one in?

I was going to try and get away from going to a tuner if I could p.s I have no idea what I'm talking about haha
I was going to wire it in and see if the 1 can do me a tune just to keep me going until I can afford a tuner

The1 is the brains behind the enhanced code. With his code the MAF is no longer a restriction.
And a MAP is not compatible.

So if I get a tune from him I can run without a maff but the map wouldn't work is what your saying ?

You leave the maf in as normal with his code. No map required.
If you went with Kalmaker you would remove the maf and go to a map.
Which from memory goes to a egr input?

I have no idea where it goes man just thought I could save myself some money haha

The 1 tunes with his enhanced code which is MAF based. You wont need a MAP sensor.