Page 1 of 1
Tunerpro adx question
Posted: Tue Sep 22, 2015 10:12 am
by wozza
Hi
Im using the VR $11 v1.05 tp5 adx in tunerpro and have a quad driver fault reported...
Im wondering that as I have the last model series 2 VR with a 5hdd trans the fault maybe related to having the 5hdd rather than the 4hdd?
Thanks
Re: Tunerpro adx question
Posted: Fri Sep 25, 2015 10:28 am
by wozza
Hmmmm so stupid question?...didnt include the secret hand shake
wrong section....or nobody knows?
I did do a search found very little so if been discussed before a link will do
thanks
Re: Tunerpro adx question
Posted: Fri Sep 25, 2015 12:15 pm
by 0081
I think the quad driver fault is normal when logging.
Re: Tunerpro adx question
Posted: Fri Sep 25, 2015 4:15 pm
by antus
Yeah I have heard that it is normal on later models, dont know for sure about the VR, but quite possibly.
Re: Tunerpro adx question
Posted: Fri Sep 25, 2015 5:55 pm
by wozza
Thanks for the reply's
I know its prob nothing to worry about but it drives me nuts not knowing
if there is a fault or not
All I can find is if there is no hardware hanging off that part of the driver it will throw up a fault....but if there is a short in the wiring/coil in any hardware it will throw up an error as well
Im about due for a trans service and just wanna get it fixed if its fixable
Re: Tunerpro adx question
Posted: Tue Sep 29, 2015 12:42 pm
by Tazzi
antus wrote:Yeah I have heard that it is normal on later models, dont know for sure about the VR, but quite possibly.
Ummm.... Im sure I saw something in the VR adx's which I thought may have been a mistake when going through them which I wanted to question. Something related to the faults... hmm.. let me check...
*Edit
Nevermind.. cant find any notes in regards to the VR quad fault. I must have got confused somewhere.
Re: Tunerpro adx question
Posted: Tue Sep 29, 2015 1:43 pm
by wozza
Tazzi wrote:antus wrote:Yeah I have heard that it is normal on later models, dont know for sure about the VR, but quite possibly.
Ummm.... Im sure I saw something in the VR adx's which I thought may have been a mistake when going through them which I wanted to question. Something related to the faults... hmm.. let me check...
*Edit
Nevermind.. cant find any notes in regards to the VR quad fault. I must have got confused somewhere.
This what your looking for? (quad driver.zip file 2nd last post)
http://pcmhacking.net/forums/viewtopic. ... ver#p13589