Re: My old FB Ute V6 Project
Posted: Tue Nov 03, 2015 8:33 pm
That's not VL ! May be VN group a as well ?
pcmhacking.net
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
My old FB Ute V6 Project
Page 2 of 4
Re: My old FB Ute V6 Project
Posted: Tue Nov 03, 2015 9:07 pm
And vn-vr timing covers
Re: My old FB Ute V6 Project
Posted: Fri Nov 06, 2015 5:31 am
2nd dibs on those wheels Sammy.
VN-VP front speaker grilles.
Surely someone has to be able to start printing stuff off in these 3D printer action for the plastics.
VN-VP front speaker grilles.
Surely someone has to be able to start printing stuff off in these 3D printer action for the plastics.
Re: My old FB Ute V6 Project
Posted: Fri Nov 06, 2015 7:48 am
you can get good speaker grilles, you just need to find VN ones as they used a better quality ABS than VP did.
Re: My old FB Ute V6 Project
Posted: Mon Sep 26, 2016 1:25 pm
its been a long time coming, but the dash is now alive 
it uses the original VR dash loom just cut and re-connected to the required connectors for this setup.
theres a coolant temp gauge, fuel tank level and kph speedo, plus the full range of indicator lights to the left of the dash cluster!
the one in the centre that is not on is high beams.
it uses the original VR dash loom just cut and re-connected to the required connectors for this setup.
theres a coolant temp gauge, fuel tank level and kph speedo, plus the full range of indicator lights to the left of the dash cluster!
the one in the centre that is not on is high beams.
- IMG_0277 (2).jpg (273.62 KiB) Viewed 39791 times
Re: My old FB Ute V6 Project
Posted: Tue Sep 27, 2016 6:38 am
thats awesome sammy. that same radiator is whats in my hilux. what are your fans from>
Re: My old FB Ute V6 Project
Posted: Tue Sep 27, 2016 7:18 am
Ford mondeo twin thermos
Re: My old FB Ute V6 Project
Posted: Sun Oct 20, 2019 9:04 am
i'll just leave this here 
Re: My old FB Ute V6 Project
Posted: Sun Oct 20, 2019 11:03 am
nice af!
Re: My old FB Ute V6 Project
Posted: Sun Oct 20, 2019 7:35 pm
Wow that’s some nice work on that Ute.