Knock Box Talk
Re: Knock Box Talk
just out of curiosity has anyone tried this unit from jaycar http://www.jaycar.com.au/Kits,-Science- ... e/p/KC5444
looks like it should be able to be tied into the 808 on pin b7 to act like the esc modules from the early camaros although i have read one blog about it saying it needed a little better filtering
looks like it should be able to be tied into the 808 on pin b7 to act like the esc modules from the early camaros although i have read one blog about it saying it needed a little better filtering
-
- Posts: 340
- Joined: Sat Mar 21, 2009 2:02 pm
- cars: VT S1 LS1 C/dore track car
HJ GTS Monaro Coupe
CV8 V2 S3
VE SSV
Re: Knock Box Talk
Geez 202t is that the sensor I sent up to you about 4 years ago
For anyone that has an aux port in their stereo,just wire up an alloytec or ls knock
sensor and plug it in.
Work uses this method as a back up when using a towing dyno.
For anyone that has an aux port in their stereo,just wire up an alloytec or ls knock
sensor and plug it in.
Work uses this method as a back up when using a towing dyno.
-
- Posts: 3427
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: Knock Box Talk
That's so simple it's stupid. I like itmonaro308 wrote:Geez 202t is that the sensor I sent up to you about 4 years ago
For anyone that has an aux port in their stereo,just wire up an alloytec or ls knock
sensor and plug it in.
Work uses this method as a back up when using a towing dyno.
With a decent stereo you should be able to filter it too
Would one of the Nissan type knock sensors work? I think I'll grab one and see how it goes through the stereo.
BTW, what would be the ideal location(s) for a knock sensor?
Last edited by immortality on Thu Nov 12, 2015 3:01 pm, edited 1 time in total.
- vlad01
- Posts: 7806
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Knock Box Talk
hmmm? wonder how well a cassette tape adapter will work? or it might introduce noise in itself?
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: Knock Box Talk
What is this tape player thing you speak of ? Lol
- vlad01
- Posts: 7806
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Knock Box Talk
Its this new tech that replaces 8 track.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: Knock Box Talk
Pisser, I've had my HQ over 20 years and it's never had a tape player !
- vlad01
- Posts: 7806
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Knock Box Talk
All my holdens now have the original eurovox cassette players. only my vacationer had an aftermarket cd player which I never used the CD part of it.
I can't even remember the last time I even touched an audio CD, let alone a tape lol.
I can't even remember the last time I even touched an audio CD, let alone a tape lol.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: Knock Box Talk
I wish my Q still had the original radio, I just don't want to pay the stupid $$ for one knowing that il never use it ! I like cars that look original, just not in the performance department lol
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Knock Box Talk
I've been busymonaro308 wrote:Geez 202t is that the sensor I sent up to you about 4 years ago
For anyone that has an aux port in their stereo,just wire up an alloytec or ls knock
sensor and plug it in.
Work uses this method as a back up when using a towing dyno.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread