Page 1 of 1
tps range calibration
Posted: Fri Mar 04, 2016 9:23 am
by jenko
I am wondering if some one can point me in the right direction for calibrating the tps ( after market throttle body) it has a range of 0%-80%. I was able to modify the range in kalmaker but can't seem to find the adjustment in 12p.
Re: tps range calibration
Posted: Fri Mar 04, 2016 10:35 am
by Dylan
Im not on my laptop but id be sure it would be a scalar maybe tps full travel voltage or similair description.
Re: tps range calibration
Posted: Fri Mar 04, 2016 10:59 am
by Holden202T
i work on a computer
TPS - TPS Full travel - Worst case minimum voltage
in the case of $12P bins, 3.33v for V8 and 2.96v for v6.
Re: tps range calibration
Posted: Fri Mar 04, 2016 11:19 am
by jenko
thanks guys
Re: tps range calibration
Posted: Fri Mar 04, 2016 9:47 pm
by antus
Should be 0 to 5v with 5v reference supply, but as above. Ive as above. Ive done that to get nissan auto tps working on an 808 with about 2.5v max. The resolution loss was noticable in the logs but sufficient for operation.