Logger V2 11P ADX

[Dylan]

you can use your logger with the non-AUX ADX and it should work fine. its only the adx that includes aux data that is stuffed.

So if I was to set up that adx for wideband on aux 1 would that acause an issue? Wideband is very important at this stage. Is tat something you could do for me to minimise trouble?

[VL400]

Try this one, havnt looked at the zip to find out what is wrong there but attached is what I have been using.

The two byte issue is if you are using an ADX from a previous version. In V111 the aux data increased by two bytes to allow for the digital state bytes.

[VX L67 Getrag]

MAN ALIVE HARLEY.... (lol just silly line out of harley davidson & the marlborough man) good to hear from you VL!

[Dylan]

Try this one, havnt looked at the zip to find out what is wrong there but attached is what I have been using.

The two byte issue is if you are using an ADX from a previous version. In V113 the aux data increased by two bytes to allow for the digital state bytes.

Thanks very much mate I willtry them out!

Welcome back too mate

[Dylan]

VL400 that ADX works a treat. Cpuld yi modify it to suit a Spartan 1 wideband? I changed the calc abd out in a number t get it to display on the live view but just ballsed it up. I copied the calcs from a 12P logger ADX I use but didn't seem to like it.

[VL400]

Good stuff

There are some examples in the instruction PDF, but for a 14point7/spartan using 10-20 AFR over a 0-5V range the simplified calc is X / 102.4 + 10. Attached has both innovate and spartan/14point7 items added.

[Dylan]

Worked a treat mate thanks!

I did manage something myself I got calc VE working. My 12P logger used a different calc for my Spartan which works ok on that but not on this 11P.

[VL400]

Good to hear its working.