Delco PIS firmware soon.. :)

For discussion and distribution of custom code and hacks
Posts: 551
Joined: Fri Jul 17, 2009 2:11 pm
Location: GOLD COAST QLD

Re: Delco PIS firmware soon.. :)

Postby vn5000 » Sun Aug 08, 2010 12:29 pm

Well im not having much success reading any data from ecu .
Ive tried a 3082 single wire ,808 h/speed mod, tried using tunerpro ,megatunix and access port.
I can only assume ive not copied / converted the s19 file properly even though the iac motor retracts and then comes back out on power up , as Jay said it should .If anyone has a working bin file can you compare this bin with yours and check it for me please.
Attachments
STD PIS BIN.bin
(32 KiB) Downloaded 228 times

Site Admin
User avatar
Posts: 6223
Joined: Sat Feb 28, 2009 8:34 pm

Re: Delco PIS firmware soon.. :)

Postby antus » Sun Aug 08, 2010 6:27 pm

I had a try of this today, I also couldnt get any comms out of it. Using the adx and TP5, and with a serial monitor I could see data being written, but nothing was coming back :(

Code: Select all
500 0.00000810  TunerPro.exe    IOCTL_SERIAL_GET_TIMEOUTS   VCP0    SUCCESS
501 0.00000279  TunerPro.exe    IOCTL_SERIAL_SET_TIMEOUTS   VCP0    SUCCESS RI:75 RM:0 RC:300 WM:0 WC:300
502 0.00000419  TunerPro.exe    IOCTL_SERIAL_PURGE  VCP0    SUCCESS Purge: RXCLEAR
503 0.00000307  TunerPro.exe    IOCTL_SERIAL_PURGE  VCP0    SUCCESS Purge: TXCLEAR
504 0.00298027  TunerPro.exe    IRP_MJ_WRITE    VCP0    SUCCESS Length 5: 73 00 00 00 7C
505 0.00000559  TunerPro.exe    IOCTL_SERIAL_GET_TIMEOUTS   VCP0    SUCCESS
506 0.00000279  TunerPro.exe    IOCTL_SERIAL_SET_TIMEOUTS   VCP0    SUCCESS RI:75 RM:0 RC:400 WM:0 WC:300
507 0.40237460  TunerPro.exe    IRP_MJ_READ VCP0    TIMEOUT Length 0:
508 0.00000726  TunerPro.exe    IOCTL_SERIAL_GET_TIMEOUTS   VCP0    SUCCESS
509 0.00000279  TunerPro.exe    IOCTL_SERIAL_SET_TIMEOUTS   VCP0    SUCCESS RI:75 RM:0 RC:300 WM:0 WC:300
510 0.00000670  TunerPro.exe    IOCTL_SERIAL_PURGE  VCP0    SUCCESS Purge: RXCLEAR
511 0.00000279  TunerPro.exe    IOCTL_SERIAL_PURGE  VCP0    SUCCESS Purge: TXCLEAR
512 0.00293445  TunerPro.exe    IRP_MJ_WRITE    VCP0    SUCCESS Length 5: 73 00 00 00 7C
513 0.00000447  TunerPro.exe    IOCTL_SERIAL_GET_TIMEOUTS   VCP0    SUCCESS
514 0.00000279  TunerPro.exe    IOCTL_SERIAL_SET_TIMEOUTS   VCP0    SUCCESS RI:75 RM:0 RC:400 WM:0 WC:300
515 0.40202093  TunerPro.exe    IRP_MJ_READ VCP0    TIMEOUT Length 0:
516 0.00000559  TunerPro.exe    IOCTL_SERIAL_GET_TIMEOUTS   VCP0    SUCCESS
517 0.00000279  TunerPro.exe    IOCTL_SERIAL_SET_TIMEOUTS   VCP0    SUCCESS RI:75 RM:0 RC:300 WM:0 WC:300
518 0.00000419  TunerPro.exe    IOCTL_SERIAL_PURGE  VCP0    SUCCESS Purge: RXCLEAR
519 0.00000279  TunerPro.exe    IOCTL_SERIAL_PURGE  VCP0    SUCCESS Purge: TXCLEAR
520 0.00293361  TunerPro.exe    IRP_MJ_WRITE    VCP0    SUCCESS Length 5: 73 00 00 00 7C
521 0.00016175  TunerPro.exe    IOCTL_SERIAL_GET_TIMEOUTS   VCP0    SUCCESS
522 0.00000251  TunerPro.exe    IOCTL_SERIAL_SET_TIMEOUTS   VCP0    SUCCESS RI:75 RM:0 RC:400 WM:0 WC:300
523 0.40280483  TunerPro.exe    IRP_MJ_READ VCP0    TIMEOUT Length 0:
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 551
Joined: Fri Jul 17, 2009 2:11 pm
Location: GOLD COAST QLD

Re: Delco PIS firmware soon.. :)

Postby vn5000 » Sun Aug 08, 2010 7:42 pm

Yeah its a shame it wont communicate .It has a lot of potential looking at the xdf and megatunix looks good too.

Posts: 13
Joined: Sun Oct 18, 2009 1:14 am

Re: Delco PIS firmware soon.. :)

Postby Jay » Sun Aug 08, 2010 11:46 pm

Hi,
Looking at your log Ant, I noticed 0x73 which is an old command, it looks like the adx on github maybe the wrong version. I will look into this further. thanks!

Regards
Jay

Posts: 13
Joined: Sun Oct 18, 2009 1:14 am

Re: Delco PIS firmware soon.. :)

Postby Jay » Sun Aug 08, 2010 11:59 pm

vn5000 wrote:Well im not having much success reading any data from ecu .
Ive tried a 3082 single wire ,808 h/speed mod, tried using tunerpro ,megatunix and access port.
I can only assume ive not copied / converted the s19 file properly even though the iac motor retracts and then comes back out on power up , as Jay said it should .If anyone has a working bin file can you compare this bin with yours and check it for me please.


The adx is wrong for sure. i'll dig out the right one from another machine here, however MTX should work fine, all I use is a good old 808 with a ttl converter board $5 from ebay 2 wires + power / gnd patched into the pcb as per a post on here.

Regards
Jay

Posts: 18
Joined: Mon Oct 31, 2011 12:34 pm

Re: Delco PIS firmware soon.. :)

Postby syntaxterror » Mon Jul 02, 2012 8:39 am

This now has support in the latest version http://sourceforge.net/projects/megatun ... MegaTunix/

User avatar
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: Delco PIS firmware soon.. :)

Postby VL400 » Wed Jul 04, 2012 3:24 am

Its a shame this firmware was not taken further :( It had real promise for those wanting aftermarket ECU feel and features on factory hardware.

Posts: 2
Joined: Fri Mar 13, 2020 6:10 pm

Re: Delco PIS firmware soon.. :)

Postby Cowtipper » Sun May 24, 2020 9:25 pm

Damn this looked lke a great piece of software

Previous

Return to Custom Code

Who is online

Users browsing this forum: No registered users and 3 guests