Page 1 of 2
wiring in the mtx-l to nvram 808
Posted: Wed Aug 03, 2016 8:02 pm
by VQTURBO
Can someone please link me to a how to for wiring an Innovate MTX-L to the nvram 808 I have please? Cheers
Re: wiring in the mtx-l to nvram 808
Posted: Wed Aug 03, 2016 8:04 pm
by Holden202T
connect the yellow wire to pin D8, that's it.
info for what pins do what on $12P is in the zip file for it and the info on the innovate wiring is either in the doco you got with it and also available on innovates website for download.
Re: wiring in the mtx-l to nvram 808
Posted: Wed Aug 03, 2016 8:13 pm
by VQTURBO
Thanks mate
Re: wiring in the mtx-l to nvram 808
Posted: Fri Aug 05, 2016 7:24 pm
by VQTURBO
Another quick question I will be data logging tomorrow morning do you know if I will need the vn/vp adx or the vr adx I have a turbo buick v6 manual in a vq with an 808 nvram set-up. Cheers
Re: wiring in the mtx-l to nvram 808
Posted: Fri Aug 05, 2016 7:32 pm
by antus
You need the one to suit the OS. Presumably that would be 12p and is in the 12p zip file.
Re: wiring in the mtx-l to nvram 808
Posted: Fri Aug 05, 2016 7:33 pm
by Dylan
Whatever matches the code on the memcal. If it's a VN code ou will get no usefull data.
Being turbo it's likely to be Kalmaker or 12P. Both need there own ADX.
Do you know what code was used for the memcal?
Re: wiring in the mtx-l to nvram 808
Posted: Fri Aug 19, 2016 1:25 pm
by VQTURBO
should there be numbers on the eprom on my nvram?
Re: wiring in the mtx-l to nvram 808
Posted: Fri Aug 19, 2016 1:39 pm
by Dylan
No info relating to the code anyway. I just re read and realized you are running NVRAM. I'd start with a 12P ADX and go from there. See what data comes back. Maybe use flash tool and get a read and post up the bin. Then we shouodbe able to set you straight.
Re: wiring in the mtx-l to nvram 808
Posted: Fri Aug 19, 2016 2:04 pm
by VQTURBO
can i msg you the bin please mate?
Re: wiring in the mtx-l to nvram 808
Posted: Fri Aug 19, 2016 10:27 pm
by antus
Someone might help you privately but direct help via pm is a free service you might not get. If you post your bin for all then more people might be willing to help for the greater good. Sorry if that sounds stupid, just trying to tell it how it is.