Vlads Braking Thread Hijack
Re: FX Holden Race Car Project
Last one's I brought reco were a company called CardoneA1 or similair. They list by part number not by model.
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: FX Holden Race Car Project
So am I reading that we only need the caliper mounting brackets to use with the existing caliper and new vented rotor?Dylan wrote:I'll look them up tonight I have the part numbers on my PC. Think it was 86 corvette. I have the IRS HSV caliper bracket at home I'd part with for the right price. Got the front twin piston part numbers too but they're easy to pick.
I have the VT type calipers and T3 rotors for the front with a VT style booster and MC to make it all work.
- vlad01
- Posts: 7804
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: FX Holden Race Car Project
those finned ones have a bigger piston bit over 40mm where stock holden is 38.1mm
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: FX Holden Race Car Project
And can take the finned rotor too
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: FX Holden Race Car Project
I don't think the issue is the braking power of the rear brakes but more that they overheat. I'd like to get a vented rotor on the rear and what ever caliper suits.
Re: FX Holden Race Car Project
That's this set up. Brakes can get very confusing I seen your post earlier. Tell me what you have and what you want in a post and I'll set you straight.
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: FX Holden Race Car Project
Sitting in the garage I have VT style calipers with QFM pads, T3 4000 series DBA rotors and Safebrake steel braided lines, VX booster and MC with appropriate bracket, just need to sort out the rears and then bolt it all on.
- vlad01
- Posts: 7804
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: FX Holden Race Car Project
basically got all the same bits and also need something for the rear.
I was looking at this before and I can't work out how the handbrake will work? I messaged they guy asking how it works.
I would be interested in just the brackets and sort the rest out myself provided nothing major has to be done for the rotors.
http://www.ebay.com.au/itm/315mm-REAR-B ... 210cfda14c
I was looking at this before and I can't work out how the handbrake will work? I messaged they guy asking how it works.
I would be interested in just the brackets and sort the rest out myself provided nothing major has to be done for the rotors.
http://www.ebay.com.au/itm/315mm-REAR-B ... 210cfda14c
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: FX Holden Race Car Project
Worth a read for IRS at least http://www.commodoresplus.com.au/forums ... e-to-vt-z/
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: FX Holden Race Car Project
Yes, upgrading to the VT rear brakes was the other option I was considering. My only major consideration is that I want to be able to fit a 15" rim on the rear.