Injector flow rate
Posted: Fri Apr 30, 2010 2:10 pm
I am changing to blue top bosch 775 injectors from the standard v8 injectors just wanted to double check this is right 0.13 grams a second for blue ? from 0.15 standard
pcmhacking.net
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
Injector flow rate
Page 1 of 1
Re: Injector flow rate
Posted: Fri Apr 30, 2010 2:24 pm
blue tops are 0.116 or Hex 7D
Re: Injector flow rate
Posted: Fri Apr 30, 2010 2:27 pm
Be carefull with tuner pro as it doesnt have very high resolution with inj rate -make sure you type in 7d.
Re: Injector flow rate
Posted: Fri Apr 30, 2010 2:50 pm
Thats not an issue with tunerpro. If its not 3 or 4 digits after the decimal place then edit the xdf itself and turn the precision up some, then you'll be fine.
Re: Injector flow rate
Posted: Fri Apr 30, 2010 5:02 pm
Ok now i am confused 
I opened a tune that uses blue top injectors standard the 5.7 litre vs and inj flow was 0.13 in tunerpro
And in ose 12p it was 0.15 so i just figured it would be as easy as changing it to 0.13
I opened a tune that uses blue top injectors standard the 5.7 litre vs and inj flow was 0.13 in tunerpro
And in ose 12p it was 0.15 so i just figured it would be as easy as changing it to 0.13
Re: Injector flow rate
Posted: Fri Apr 30, 2010 5:53 pm
injector rate is based on cylinder size AND injector flow...
in a 355 its 0.13 (probably not exactly... add a few more significant digits to your definition and get it exact) in a 304 its 0.116
in a 355 its 0.13 (probably not exactly... add a few more significant digits to your definition and get it exact) in a 304 its 0.116
Re: Injector flow rate
Posted: Fri Apr 30, 2010 6:42 pm
ok thanks for the help going to fit them tomorrow just wanted to be sure