Page 1 of 1
VZ 3.6 V6 ECU Pinout Bosch E55
Posted: Thu Oct 06, 2016 7:13 am
by DHW
Hi Guys
Anyone have a pinout for this ECU?
Struggling to find anything.
Need powers, grounds and communication pins.
Cheers
Re: VZ 3.6 V6 ECU Pinout Bosch E55
Posted: Thu Oct 06, 2016 8:14 am
by Holden202T
I'm not sure if all of them were E55 or not ? but I have this....
Re: VZ 3.6 V6 ECU Pinout Bosch E55
Posted: Thu Oct 06, 2016 2:42 pm
by DHW
Oooh, thats gold. Thanks a bundle! I'll have a peak see if it matches.
Anyone bench harnessed one for reflashing?
Re: VZ 3.6 V6 ECU Pinout Bosch E55
Posted: Thu Oct 06, 2016 3:08 pm
by antus
Made post a sticky.
Re: VZ 3.6 V6 ECU Pinout Bosch E55
Posted: Thu Oct 06, 2016 3:11 pm
by Holden202T
DHW wrote:Oooh, thats gold. Thanks a bundle! I'll have a peak see if it matches.
Anyone bench harnessed one for reflashing?
no I've only ever re-flashed in the car.
Re: VZ 3.6 V6 ECU Pinout Bosch E55
Posted: Sun Oct 09, 2016 9:11 pm
by Jayme
ya I made up a bench harness while ago.... worked fine. from memory, I just followed holdens pinouts and connected power, ground and CAN wires.
Re: VZ 3.6 V6 ECU Pinout Bosch E55
Posted: Mon Oct 10, 2016 10:18 am
by Tazzi
Jayme wrote:ya I made up a bench harness while ago.... worked fine. from memory, I just followed holdens pinouts and connected power, ground and CAN wires.
May need to throw in another terminating resistor into the harness to make the comms line meet standards, otherwise works straight out of the box following the diagram.