Page 1 of 1
VE learn parrameters
Posted: Sun Oct 09, 2016 1:24 pm
by Yortt
With 12P does "wideband 0 volt" and "wideband 5 volt" settings have any other function other than setting up the wideband max and minimum parameters in the editor for the VE learn function.
thanks
Re: VE learn parrameters
Posted: Mon Oct 10, 2016 10:31 am
by Holden202T
not just for VE learn, it will effect the wideband data in the aldl stream too.
but if you don't have ve learn enabled, theres nothing else in the tune that it should effect.
Re: VE learn parrameters
Posted: Mon Oct 10, 2016 4:14 pm
by Yortt
Holden202T wrote:not just for VE learn, it will effect the wideband data in the aldl stream too.
but if you don't have ve learn enabled, theres nothing else in the tune that it should effect.
Thanks Holden202T for the response, I thought this setting was for the editor reference changes for ve learn, so if you don't have ve enabled it does not influence/effect the aldl stream ?
I thought the aldl wideband stream was controlled by the formula in the ADX values for the wideband calibration which was dedicated for the logger through the aldl stream?
Re: VE learn parrameters
Posted: Tue Oct 11, 2016 10:52 am
by Holden202T
sorry my second sentence confused things....
ve learn and wideband aldl stream is all it will effect, if your not using either then having the settings wrong wont do anything to the tune .....
Re: VE learn parrameters
Posted: Tue Oct 11, 2016 2:52 pm
by Yortt
OK thanks