Holden202T wrote: i'd love to see a wiring diagram for the one you mention, as for a commodore v6 here, the 18x goes from the crank trigger into the DFI module, it then just sends the 3 x signals to the ECM.
the scope is here ... just search logic analser - https://www.ebay.com.au/itm/201557127906
I was wrong about the 18x 1x trigger. It's a 24x crank trigger and coil on plug. It's the 1999-2002 Oldsmobile Aurora 3.5l Shortstar engine. It uses a Delco PCM. I haven't found a wiring diagram for one yet.
I've been looking online for one in a wrecking yard but no luck yet.
As far as I know it's the only V6 GM made with a 24x crank trigger.
Autozone has diagrams on there website for this PCM.
If you are in the US, there is a 2001 Aurora in a salvage yard about 50 miles away from me.
I may be able to get PCM etc.
MudDuck514 wrote:Autozone has diagrams on there website for this PCM.
If you are in the US, there is a 2001 Aurora in a salvage yard about 50 miles away from me.
I may be able to get PCM etc.
Mike
Thanks for the offer but I was just looking local. Besides I've already spent my "PLAY" money for the month. LOL
I would love to have one to play with but I don't even know what it would take to read it.
I use PCMHammer for my Jeep I just put a P59 in. I did buy HPT to tune my Hemi powered JKUR. But I don't like the price of their credits.
I know it's a Delco so I'm not sure if my HPT would even read it, it might.
IF the car is still there next time they have a "Bucket Day Sale" I will see if I can get the PCM and main wiring harness (plus the TB for myself, lol)
MudDuck514; that sounds great. Let me know.
I wish my local pull a part had bucket days. They don't even post prices. When you get to the desk they add it up and let you know how much it is. They are very reasonable with their prices but it'd be nice to know what things cost before you go on the lot.
antus wrote:I found this for the Oldsmobile Aurora 3.5l Shortstar LX5 engine, but i'm not sure its relevant to the P01.
It's probably not relevant to the P01, it's a Delco PCM.
Here's what I've found on the 3.5l Shortstar. There's some wire diagrams and a PCM pinout I got from a post on Gearhead EFI.
I haven't looked through them yet to verify the info.
I guess we got a little side tracked.
@Holden202T Ive been thinking about this and looking at diagrams, The only thing I can think other than the little things that you should have covered already is that the crank polarity might be backwards. If this was the case the cam phase shift might be one crank period out of whack based on what the PCM is seeing which might be beyond the margin of timing error and could be stopping it syncing up.
I found this to be a bit of mystery when testing my functioning 0411 bench loom with EFILive. It was a factory GM loom and I am quit sure I made no mistakes in numbering the injectors.
Bin was a standard DSKW 300KWM6.BIN
NEW INFORMATION DISCOVERED 08-06-20
------------------------------------------------
LS1 BLUE CONNECTOR PIN 36 V8 INJ #1 Control is seen by "EFILive Bi-directional" as Injector #8 at PIN 77
LS1 BLUE CONNECTOR PIN 4 V8 INJ #2 Control is seen by "EFILive Bi-directional" as Injector #5 at PIN 76
LS1 BLUE CONNECTOR PIN 3 V8 INJ #3 Control is seen by "EFILive Bi-directional" as Injector #1 at PIN 36
LS1 BLUE CONNECTOR PIN 44 V8 INJ #4 Control is seen by "EFILive Bi-directional" as Injector #2 at PIN 4
LS1 BLUE CONNECTOR PIN 76 V8 INJ #5 Control is seen by "EFILive Bi-directional" as Injector #3 at PIN 3
LS1 BLUE CONNECTOR PIN 37 V8 INJ #6 Control is seen by "EFILive Bi-directional" as Injector #4 at PIN 44
LS1 BLUE CONNECTOR PIN 43 V8 INJ #7 Control is seen by "EFILive Bi-directional" as Injector #6 at PIN 37
LS1 BLUE CONNECTOR PIN 77 V8 INJ #8 Control is seen by "EFILive Bi-directional" as Injector #7 at PIN 43
kojab wrote:I found this to be a bit of mystery when testing my functioning 0411 bench loom with EFILive. It was a factory GM loom and I am quit sure I made no mistakes in numbering the injectors.
Bin was a standard DSKW 300KWM6.BIN
NEW INFORMATION DISCOVERED 08-06-20
------------------------------------------------
LS1 BLUE CONNECTOR PIN 36 V8 INJ #1 Control is seen by "EFILive Bi-directional" as Injector #8 at PIN 77
LS1 BLUE CONNECTOR PIN 4 V8 INJ #2 Control is seen by "EFILive Bi-directional" as Injector #5 at PIN 76
LS1 BLUE CONNECTOR PIN 3 V8 INJ #3 Control is seen by "EFILive Bi-directional" as Injector #1 at PIN 36
LS1 BLUE CONNECTOR PIN 44 V8 INJ #4 Control is seen by "EFILive Bi-directional" as Injector #2 at PIN 4
LS1 BLUE CONNECTOR PIN 76 V8 INJ #5 Control is seen by "EFILive Bi-directional" as Injector #3 at PIN 3
LS1 BLUE CONNECTOR PIN 37 V8 INJ #6 Control is seen by "EFILive Bi-directional" as Injector #4 at PIN 44
LS1 BLUE CONNECTOR PIN 43 V8 INJ #7 Control is seen by "EFILive Bi-directional" as Injector #6 at PIN 37
LS1 BLUE CONNECTOR PIN 77 V8 INJ #8 Control is seen by "EFILive Bi-directional" as Injector #7 at PIN 43
So EFILive tells you what injector is on which pin?