vr v8 turbo base tune

[vlt304]

here is 1 of the bins before I ran it up on they dyno drove nice on the street a bit paris Hilton on boost (rich and retarded) but no ping and safe.cant find the post dyno 1 at the moment. it is 12p v111

[Wade]

Injector bias add-on, I zero'd that all out. Injector bias vs battery voltage I done my best to match them up with the injector info I have. But from 4.80 to 6.40 volts I've got no info for so left them the way they are

[Wade]

I still can't get the 2bar adx to connect in tunerpro. As soon as I change it back to 1bar adx connects first go

[Wade]

Got the adx working

[VL400]

If you can let us know what was wrong I will fix the ADX.

[Wade]

The rs232 echo box just needed to be ticked. Worked perfect after that

[VL400]

Thanks for letting us know the cause, that makes sense! I had assumed you were using the OSE plugin and an NVRAM.

[Wade]

Do I set the injector rate to 0.045 or 0.060?. For 65lb injectors. I still haven't figured out how to use kinjflow

[Dylan]

Well I still had thwt spreadsheet opened on my laptop turns out I left it as 6 cylinder. Sorry for the confusion. Yes 0.04 would be more suited for 65lb.

[Wade]

Thanks Dylan