vr v8 turbo base tune
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: vr v8 turbo base tune
looks like you need to set single fire mode at low pulsewidths the injectors probably not liking so low of a pulsewidth one minute they are struggling to open at all then bpw goes high enough due to ve change and bam they open.get dylan to set the narrow pulsewidth high and low settings in the top window of tunerpro to say 2ms and 3 ms just till you get it idling good and clean
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: vr v8 turbo base tune
Well worth a try good idea to. I haven't looked at the bin yet. Just assisted with the injector data tables.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: vr v8 turbo base tune
I would of changed it and reuploaded but only had time for a quick look at the log and back to my movie lol
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: vr v8 turbo base tune
What's on tonight? Titanic?
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: vr v8 turbo base tune
Popcorn time movies streamed heaps tonight lol
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: vr v8 turbo base tune
You must use the 2bar ADX still, the MAP value displayed will be half actual using the 1 bar ADX. You can playback your XDL file with the 2 bar ADX to get the correct values.Wade wrote:I was using the 2bar adx but it wouldn't let me connect with the aldl in tunerpro so I changed back to the 1bar adx. I was assuming with the 2bar map selected it would still be ok?
The 2bar and 1bar ADX are very similar so should work, the default config is setup for use with the OSE plugin. Can you try the attached? Made some minor changes, but nothing that should fix it as the connection and processing stuff is all the same as the 1 bar ADX.
- Attachments
-
- OSE_$12PV112_2BAR - Petrol with VECalc.adx
- (85.57 KiB) Downloaded 277 times
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: vr v8 turbo base tune
thanks vl400. I'll give it go
Re: vr v8 turbo base tune
i had to go single fire with 42lb injectors in my 304 for it to run and start fires up like a stock engine no dramas.
Re: vr v8 turbo base tune
What ms values did you run?
Re: vr v8 turbo base tune
the bin is on my other laptop i will boot it up in a min and grab it