pcmhacking.net

Hi guys this all new to me, but to exspand my Business its a necessary evil. I would like to start making up memcals for VS-VT Commodores i can get the chips but what bread board/ Circuit Board do i need. I have the programer and the S-Ram and OBD Adaptor thanks to The-1.

It depends what chips your talking. If they are the original EPROM you need a UV Eraser and a programmer like a GQ-4X. If you are converting to EEPROM (electronic erase programable read only memory) as most people do because the uv erase is a PITA then you just need the programmer. It also simplifies things if you have an adaptor so you can plug the memcal straight in to the programmer. For more specific information see "Guide to Burning Memcals, Nvrams ETC" in the FAQ area (link near top right).

Good to see someone supporting the old Delco. What's your business?