Page 4 of 6
Re: 304 running on 808 in ski boat - idle surge
Posted: Mon Nov 20, 2017 11:58 am
by rhys_main
Thanks for the tips Jenko, that makes sense.
Got a wideband on the way, so will report back after some experimenting and logging.
Re: 304 running on 808 in ski boat - idle surge
Posted: Wed Nov 22, 2017 1:07 pm
by rhys_main
Have done a bit of reading through the threads about setting up wideband with the 808... Just looking for some clarification...
Does the "Spartan 2" wideband running on 12P ('808) require/benefit from the pullup resistor removal? Or is that only for a different ECU?
Re: 304 running on 808 in ski boat - idle surge
Posted: Wed Nov 22, 2017 1:11 pm
by Holden202T
I believe that's only for the 424 pcm ?
Re: 304 running on 808 in ski boat - idle surge
Posted: Wed Nov 22, 2017 1:27 pm
by delcowizzid
my spartan read bang on on 808 no mods just dont run it too rich or splash it with water my 1st sensor is dead after less than 2 hours run time just from a few power runs on the dyno at 9:1 fueling while we dialed in boost VE seems they are a little more fragile than the older lsu4.2 sensor
Re: 304 running on 808 in ski boat - idle surge
Posted: Wed Nov 22, 2017 1:39 pm
by jenko
my spartan was spot on out of the box
Re: 304 running on 808 in ski boat - idle surge
Posted: Wed Nov 22, 2017 1:54 pm
by vlad01
I concur.
Re: 304 running on 808 in ski boat - idle surge
Posted: Wed Nov 22, 2017 3:14 pm
by jenko
Re: 304 running on 808 in ski boat - idle surge
Posted: Wed Nov 22, 2017 7:46 pm
by Gareth
You still taking your meds Vlad?
Re: 304 running on 808 in ski boat - idle surge
Posted: Wed Nov 22, 2017 7:59 pm
by vlad01
No, sometimes I forget. AHHAHA!
Re: 304 running on 808 in ski boat - idle surge
Posted: Thu Nov 23, 2017 9:47 am
by rhys_main
Haha! Thanks all!
