Page 1 of 1
ba xr8 abs
Posted: Wed Nov 22, 2017 3:52 am
by vlt304
is there any way of getting a ba xr8 pcm to talk to a non traction control abs module? a mate has fitted a ba boss engine gearbox and fire wall too a f100 and the donor car for modules and parts was a 6cyl base xt type falcon everything is in and linked but no joy with speedo it works if i put a traction control type abs module in but will require more plumbing.
Re: ba xr8 abs
Posted: Wed Apr 25, 2018 12:02 pm
by rolls
vlt304 wrote:is there any way of getting a ba xr8 pcm to talk to a non traction control abs module? a mate has fitted a ba boss engine gearbox and fire wall too a f100 and the donor car for modules and parts was a 6cyl base xt type falcon everything is in and linked but no joy with speedo it works if i put a traction control type abs module in but will require more plumbing.
Change the speed source to use the output shaft sensor in the PCM. Then you don't need the ABS module at all. You can do that with our pcmtec editor software.