kinda new to all this
Posted: Thu Dec 07, 2017 1:55 am
Hello I currently have to use 4 programs just to edit the parameter table I need in my 2000 grand am with 3800sc/4t65e trans swap
Im trying to build or find a program like the ls1flash that will allow me to just patch the info into the pcm.
I currently use HPT to pull the file HXD to read the hex out of ram to create the bin. I added the shift logic table to Tiny Tuner so I can change it easily, and edit the other needed tables and switches to match what I need.
I then use old version on hpt to load the bin since new hpt wont allow you to load bins, Then flash it back with hpt.
Id like to either be able to pull the file as a bin, edit with Tint, reflash bin or just use the program itself to edit the 3 or 4 parameters I need to change.
I know the read write for the v6 is similar if not the same as ls1 pcms.
Any help would be appreciated.
Jay
Im trying to build or find a program like the ls1flash that will allow me to just patch the info into the pcm.
I currently use HPT to pull the file HXD to read the hex out of ram to create the bin. I added the shift logic table to Tiny Tuner so I can change it easily, and edit the other needed tables and switches to match what I need.
I then use old version on hpt to load the bin since new hpt wont allow you to load bins, Then flash it back with hpt.
Id like to either be able to pull the file as a bin, edit with Tint, reflash bin or just use the program itself to edit the 3 or 4 parameters I need to change.
I know the read write for the v6 is similar if not the same as ls1 pcms.
Any help would be appreciated.
Jay