pcmhacking.net

Hi all,

Some of you may have seen this before. VX series 2 cruise control stalk upgrade. It suits VR, VS, VT, VX s1 Holden's with factory cruise control. Cost was $15 for used stalk on eBay and $4 for some crimp on connectors.

Here are the before and after pics on my VT calais. I can't take credit for this, as it came from the JC forum : https://forums.justcommodores.com.au/th ... ion.98266/

and https://forums.justcommodores.com.au/th ... rms.93614/

Pic of the wiring diagram. This might be helpful for some who want to do the conversion. I found the VX S2 stalk easier to use / adjust while driving.

Cheers

Thanks for posting!

yeah ive seen this before and plan to do the same on the Bedford one day, after its going!

had the same cruise control in the VZ and I much prefer the controls to the earlier one.

VERY impressed with that hand written diagram! Old school layout skills there!

ejukated wrote:VERY impressed with that hand written diagram! Old school layout skills there!

According to JC forum, drawing was from 2001. Must say it was well done.

Nice idea, i picked up a stalk set for $20 so will do a changeover on my VS which as a bad indicator stalk atm.

Did my stalk upgrade on my VS Berlina, I originally got standard stalks which works fine for indicator but not wiper as standard doesn't have intermittent, got another stalk and also got loom plugs, so its easy if I need to put new stalks in.

Looks nice in the VS. Is it a Calais / Berlina?

what are you saying, executive stalks don't have intermittent option on them ?

It's a VS Berlina.

Exec stalks have intermitant but it's not variable, the wiring is the same but the stalks internal wiring is different, the wipers dont even work, so you need like for like. All working fine now with a Berlina Stalk.